getent passwdがLDAPサーバーのユーザーを表示しない

LDAP認証の構成を行い、Ubuntu 14.04 TLS上のLDAPサーバーに対して認証を試みました。これはnsswitch.confファイルです。

# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.

# pre_auth-client-config # passwd:         compat ldap
passwd: files ldap
# pre_auth-client-config # group:          compat ldap
group: files ldap
# pre_auth-client-config # shadow:         compat ldap
shadow: files ldap

hosts:          files mdns4_minimal [NOTFOUND=return] dns
networks:       files

protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

# pre_auth-client-config # netgroup:       nis
netgroup: nis

このコマンドgetent passwdは、/etc/passwdLDAPユーザーを返さずにファイルのコンテンツを返します。それでも、を使用してすべてのエントリを取得しますldapsearch。

ファイル/etc/ldap.conf：

###DEBCONF###
##
## Configuration of this file will be managed by debconf as long as the
## first line of the file says '###DEBCONF###'
##
## You should use dpkg-reconfigure to configure this file via debconf
##

#
# @(#)$Id: ldap.conf,v 1.38 2006/05/15 08:13:31 lukeh Exp $
#
# This is the configuration file for the LDAP nameservice
# switch library and the LDAP PAM module.
#
# PADL Software
# http://www.padl.com
#

# Your LDAP server. Must be resolvable without using LDAP.
# Multiple hosts may be specified, each separated by a 
# space. How long nss_ldap takes to failover depends on
# whether your LDAP client library supports configurable
# network or connect timeouts (see bind_timelimit).
#host 127.0.0.1

# The distinguished name of the search base.
base dc=souad,dc=com

# Another way to specify your LDAP server is to provide an
uri ldap://192.168.95.133:389/
# Unix Domain Sockets to connect to a local LDAP Server.
#uri ldap://127.0.0.1/
#uri ldaps://127.0.0.1/   
#uri ldapi://%2fvar%2frun%2fldapi_sock/
# Note: %2f encodes the '/' used as directory separator

# The LDAP version to use (defaults to 3
# if supported by client library)
ldap_version 3

# The distinguished name to bind to the server with.
# Optional: default is to bind anonymously.
#binddn cn=proxyuser,dc=padl,dc=com

# The credentials to bind with. 
# Optional: default is no credential.
#bindpw secret

# The distinguished name to bind to the server with
# if the effective user ID is root. Password is
# stored in /etc/ldap.secret (mode 600)
rootbinddn cn=Manager,dc=souad,dc=com

# The port.
# Optional: default is 389.
#port 389

# The search scope.
#scope sub
#scope one
#scope base

# Search timelimit
#timelimit 30

# Bind/connect timelimit
#bind_timelimit 30

# Reconnect policy: hard (default) will retry connecting to
# the software with exponential backoff, soft will fail
# immediately.
#bind_policy hard

# Idle timelimit; client will close connections
# (nss_ldap only) if the server has not been contacted
# for the number of seconds specified below.
#idle_timelimit 3600

# Filter to AND with uid=%s
#pam_filter objectclass=account

# The user ID attribute (defaults to uid)
#pam_login_attribute uid

# Search the root DSE for the password policy (works
# with Netscape Directory Server)
#pam_lookup_policy yes

# Check the 'host' attribute for access control
# Default is no; if set to yes, and user has no
# value for the host attribute, and pam_ldap is
# configured for account management (authorization)
# then the user will not be allowed to login.
#pam_check_host_attr yes

# Check the 'authorizedService' attribute for access
# control
# Default is no; if set to yes, and the user has no
# value for the authorizedService attribute, and
# pam_ldap is configured for account management
# (authorization) then the user will not be allowed
# to login.
#pam_check_service_attr yes

# Group to enforce membership of
#pam_groupdn cn=PAM,ou=Groups,dc=padl,dc=com

# Group member attribute
#pam_member_attribute uniquemember

# Specify a minium or maximum UID number allowed
#pam_min_uid 0
#pam_max_uid 0

# Template login attribute, default template user
# (can be overriden by value of former attribute
# in user's entry)
#pam_login_attribute userPrincipalName
#pam_template_login_attribute uid
#pam_template_login nobody

# HEADS UP: the pam_crypt, pam_nds_passwd,
# and pam_ad_passwd options are no
# longer supported.
#
# Do not hash the password at all; presume
# the directory server will do it, if
# necessary. This is the default.
pam_password md5

# Hash password locally; required for University of
# Michigan LDAP server, and works with Netscape
# Directory Server if you're using the UNIX-Crypt
# hash mechanism and not using the NT Synchronization
# service. 
#pam_password crypt

# Remove old password first, then update in
# cleartext. Necessary for use with Novell
# Directory Services (NDS)
#pam_password clear_remove_old
#pam_password nds

# RACF is an alias for the above. For use with
# IBM RACF
#pam_password racf

# Update Active Directory password, by
# creating Unicode password and updating
# unicodePwd attribute.
#pam_password ad

# Use the OpenLDAP password change
# extended operation to update the password.
#pam_password exop

# Redirect users to a URL or somesuch on password
# changes.
#pam_password_prohibit_message Please visit http://internal to change your password.

# RFC2307bis naming contexts
# Syntax:
# nss_base_XXX      base?scope?filter
# where scope is {base,one,sub}
# and filter is a filter to be &'d with the
# default filter.
# You can omit the suffix eg:
# nss_base_passwd   ou=People,
# to append the default base DN but this
# may incur a small performance impact.
#nss_base_passwd    ou=People,dc=padl,dc=com?one
#nss_base_shadow    ou=People,dc=padl,dc=com?one
#nss_base_group     ou=Group,dc=padl,dc=com?one
#nss_base_hosts     ou=Hosts,dc=padl,dc=com?one
#nss_base_services  ou=Services,dc=padl,dc=com?one
#nss_base_networks  ou=Networks,dc=padl,dc=com?one
#nss_base_protocols ou=Protocols,dc=padl,dc=com?one
#nss_base_rpc       ou=Rpc,dc=padl,dc=com?one
#nss_base_ethers    ou=Ethers,dc=padl,dc=com?one
#nss_base_netmasks  ou=Networks,dc=padl,dc=com?ne
#nss_base_bootparams    ou=Ethers,dc=padl,dc=com?one
#nss_base_aliases   ou=Aliases,dc=padl,dc=com?one
#nss_base_netgroup  ou=Netgroup,dc=padl,dc=com?one

# attribute/objectclass mapping
# Syntax:
#nss_map_attribute  rfc2307attribute    mapped_attribute
#nss_map_objectclass    rfc2307objectclass  mapped_objectclass

# configure --enable-nds is no longer supported.
# NDS mappings
#nss_map_attribute uniqueMember member

# Services for UNIX 3.5 mappings
#nss_map_objectclass posixAccount User
#nss_map_objectclass shadowAccount User
#nss_map_attribute uid msSFU30Name
#nss_map_attribute uniqueMember msSFU30PosixMember
#nss_map_attribute userPassword msSFU30Password
#nss_map_attribute homeDirectory msSFU30HomeDirectory
#nss_map_attribute homeDirectory msSFUHomeDirectory
#nss_map_objectclass posixGroup Group
#pam_login_attribute msSFU30Name
#pam_filter objectclass=User
#pam_password ad

# configure --enable-mssfu-schema is no longer supported.
# Services for UNIX 2.0 mappings
#nss_map_objectclass posixAccount User
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid msSFUName
#nss_map_attribute uniqueMember posixMember
#nss_map_attribute userPassword msSFUPassword
#nss_map_attribute homeDirectory msSFUHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup Group
#nss_map_attribute cn msSFUName
#pam_login_attribute msSFUName
#pam_filter objectclass=User
#pam_password ad

# RFC 2307 (AD) mappings
#nss_map_objectclass posixAccount user
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid sAMAccountName
#nss_map_attribute homeDirectory unixHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup group
#nss_map_attribute uniqueMember member
#pam_login_attribute sAMAccountName
#pam_filter objectclass=User
#pam_password ad

# configure --enable-authpassword is no longer supported
# AuthPassword mappings
#nss_map_attribute userPassword authPassword

# AIX SecureWay mappings
#nss_map_objectclass posixAccount aixAccount
#nss_base_passwd ou=aixaccount,?one
#nss_map_attribute uid userName
#nss_map_attribute gidNumber gid
#nss_map_attribute uidNumber uid
#nss_map_attribute userPassword passwordChar
#nss_map_objectclass posixGroup aixAccessGroup
#nss_base_group ou=aixgroup,?one
#nss_map_attribute cn groupName
#nss_map_attribute uniqueMember member
#pam_login_attribute userName
#pam_filter objectclass=aixAccount
#pam_password clear

# Netscape SDK LDAPS
#ssl on

# Netscape SDK SSL options
#sslpath /etc/ssl/certs

# OpenLDAP SSL mechanism
# start_tls mechanism uses the normal LDAP port, LDAPS typically 636
#ssl start_tls
#ssl on

# OpenLDAP SSL options
# Require and verify server certificate (yes/no)
# Default is to use libldap's default behavior, which can be configured in
# /etc/openldap/ldap.conf using the TLS_REQCERT setting.  The default for
# OpenLDAP 2.0 and earlier is "no", for 2.1 and later is "yes".
#tls_checkpeer yes

# CA certificates for server certificate verification
# At least one of these are required if tls_checkpeer is "yes"
#tls_cacertfile /etc/ssl/ca.cert
#tls_cacertdir /etc/ssl/certs

# Seed the PRNG if /dev/urandom is not provided
#tls_randfile /var/run/egd-pool

# SSL cipher suite
# See man ciphers for syntax
#tls_ciphers TLSv1

# Client certificate and key
# Use these, if your server requires client authentication.
#tls_cert
#tls_key

# Disable SASL security layers. This is needed for AD.
#sasl_secprops maxssf=0

# Override the default Kerberos ticket cache location.
#krb5_ccname FILE:/etc/.ldapcache

# SASL mechanism for PAM authentication - use is experimental
# at present and does not support password policy control
#pam_sasl_mech DIGEST-MD5
nss_initgroups_ignoreusers avahi,avahi-autoipd,backup,bin,colord,daemon,dnsmasq,games,gnats,hplip,irc,kernoops,libuuid,lightdm,list,lp,mail,man,messagebus,news,proxy,pulse,root,rtkit,saned,speech-dispatcher,sync,sys,syslog,usbmux,uucp,whoopsie,www-data

ファイル /etc/ldap/ldap.conf

#
# LDAP Defaults
#

# See ldap.conf(5) for details
# This file should be world readable but not world writable.

BASE    dc=souad,dc=com
URI ldap://192.168.95.133:389

#SIZELIMIT  12
#TIMELIMIT  15
#DEREF      never

# TLS certificates (needed for GnuTLS)
TLS_CACERT  /etc/ssl/certs/ca-certificates.crt

何か案が？

Ubuntu 14.04 LTSを使用して、LDAPユーザーのリストを許可する必要がありました。

編集して/etc/sssd/sssd.conf、に変更enumerate = falseしenumerate = trueます。

LDAPへの接続に問題があるとき、私はよくこのようなことを目にします。サーバーのURLが正しいことを確認してください。個人的には、私はldapi：//のURLを避けています。過去に問題を引き起こしただけです。binddnがバインドできることを確認してください。パスワード認証を使用している場合は、両方の秘密ファイルを確認し、ボックスからLDAPに手動でバインドします。

これがお役に立てば幸いです。

リビジョン

#binddn cn=proxyuser,dc=padl,dc=com
#bindpw secret

binddnとそのシークレットは使用されていません。通常、両方を使用して、構成が機能していることを確認します。

改訂2

すみません、これ以上助けられませんでした。しかし、私は2つのconfファイルを期待します

1. /etc/libnss-ldapp.conf
2. /etc/pam_ldap.conf

これらのファイルと/etc/nsswitch.confの両方を使用して、LDAP認証を構成します。nsswitch.confは問題ありません。あなたが説明している効果は通常、ユーザーがLDAPに対して認証されない場合に発生します。getentが終了する前に、おそらく短い休止があります。エラーメッセージは/var/log/auth.logにあります。多くの場合、問題はbinddnがLDAPとバインドできず、このバインドが成功した後にのみ認証が行われることです。

私が言うように、申し訳ありませんがこれ以上の助けはありませんでした。