Fail2Banでは、SSHポート番号を変更する方法は？

私のサーバーでは、sshポートは標準22ではありません。別のポートを設定しました。fail2banをセットアップした場合、そのポートを検出できますか？ポート22ではなく、そのポートをチェックするように指示するにはどうすればよいですか？

の出力iptables -L -v -n：

 Chain fail2ban-ssh (1 references)
 pkts bytes target     prot opt in     out     source               destination                                                                                         
    0     0 DROP       all  --  *      *       119.235.2.158        0.0.0.0/0                                                                                           
    0     0 RETURN     all  --  *      *       0.0.0.0/0            0.0.0.0/0                                                                                           

 Chain fail2ban-ssh-ddos (0 references)
 pkts bytes target     prot opt in     out     source               destination

サービスiptablesステータスの出力：

iptables: unrecognized service

夏のfail2ban-regex /var/log/auth.log /etc/fail2ban/filter.d/sshd.conf：

Summary
=======

Addresses found:
[1]
[2]
[3]
    113.59.222.240 (Wed Mar 21 18:24:47 2012)
    113.59.222.240 (Wed Mar 21 18:24:52 2012)
    119.235.14.153 (Wed Mar 21 21:52:53 2012)
    113.59.222.21 (Thu Mar 22 07:50:44 2012)
    176.9.57.203 (Fri Mar 23 19:34:29 2012)
    176.9.57.203 (Fri Mar 23 19:34:42 2012)
    113.59.222.56 (Sat Mar 31 14:23:52 2012)
    113.59.222.56 (Sat Mar 31 14:24:05 2012)
    119.235.14.183 (Mon Apr 02 20:49:13 2012)
    119.235.14.168 (Sat Apr 21 09:58:56 2012)
    119.235.2.158 (Wed Apr 25 13:11:03 2012)
    119.235.2.158 (Wed Apr 25 13:11:40 2012)
    119.235.2.158 (Wed Apr 25 13:11:43 2012)
    119.235.2.158 (Wed Apr 25 13:11:47 2012)
    119.235.2.158 (Wed Apr 25 13:12:49 2012)
    119.235.2.158 (Wed Apr 25 13:12:52 2012)
    119.235.2.158 (Wed Apr 25 13:12:55 2012)
    119.235.2.158 (Wed Apr 25 13:12:58 2012)
    119.235.2.158 (Wed Apr 25 13:13:02 2012)
    119.235.2.158 (Wed Apr 25 13:13:04 2012)
    119.235.2.158 (Wed Apr 25 13:13:25 2012)
    119.235.2.158 (Wed Apr 25 13:19:18 2012)
    119.235.2.158 (Wed Apr 25 13:19:52 2012)
    119.235.2.158 (Wed Apr 25 13:19:55 2012)
    119.235.2.158 (Wed Apr 25 13:19:55 2012)
    119.235.2.158 (Wed Apr 25 13:19:58 2012)
    119.235.2.158 (Wed Apr 25 13:20:02 2012)
    119.235.2.158 (Wed Apr 25 13:20:05 2012)
    119.235.2.158 (Wed Apr 25 13:40:16 2012)
[4]
[5]
    119.235.2.158 (Wed Apr 25 13:11:38 2012)
    119.235.2.158 (Wed Apr 25 13:12:46 2012)
    119.235.2.158 (Wed Apr 25 13:19:49 2012)
[6]
    119.235.2.155 (Wed Mar 21 13:13:30 2012)
    113.59.222.240 (Wed Mar 21 18:24:43 2012)
    119.235.14.153 (Wed Mar 21 21:52:51 2012)
    176.9.57.203 (Fri Mar 23 19:34:26 2012)
    119.235.2.158 (Wed Apr 25 13:19:15 2012)
[7]
[8]
[9]
[10]

Date template hits:
1169837 hit(s): MONTH Day Hour:Minute:Second
0 hit(s): WEEKDAY MONTH Day Hour:Minute:Second Year
0 hit(s): WEEKDAY MONTH Day Hour:Minute:Second
0 hit(s): Year/Month/Day Hour:Minute:Second
0 hit(s): Day/Month/Year Hour:Minute:Second
0 hit(s): Day/Month/Year Hour:Minute:Second
0 hit(s): Day/MONTH/Year:Hour:Minute:Second
0 hit(s): Month/Day/Year:Hour:Minute:Second
0 hit(s): Year-Month-Day Hour:Minute:Second
0 hit(s): Day-MONTH-Year Hour:Minute:Second[.Millisecond]
0 hit(s): Day-Month-Year Hour:Minute:Second
0 hit(s): TAI64N
0 hit(s): Epoch
0 hit(s): ISO 8601
0 hit(s): Hour:Minute:Second
0 hit(s): <Month/Day/Year@Hour:Minute:Second>

Success, the total number of match is 37

However, look at the above section 'Running tests' which could contain important
information.

jail.conf：

    # Fail2Ban configuration file.
#
# This file was composed for Debian systems from the original one
#  provided now under /usr/share/doc/fail2ban/examples/jail.conf
#  for additional examples.
#
# To avoid merges during upgrades DO NOT MODIFY THIS FILE
# and rather provide your changes in /etc/fail2ban/jail.local
#
# Author: Yaroslav O. Halchenko <debian@onerussian.com>
#
# $Revision: 281 $
#

# The DEFAULT allows a global definition of the options. They can be override
# in each jail afterwards.

[DEFAULT]

# "ignoreip" can be an IP address, a CIDR mask or a DNS host
ignoreip = 127.0.0.1
bantime  = 14400
maxretry = 3

# "backend" specifies the backend used to get files modification. Available
# options are "gamin", "polling" and "auto".
# yoh: For some reason Debian shipped python-gamin didn't work as expected
#      This issue left ToDo, so polling is default backend for now
backend = polling

#
# Destination email address used solely for the interpolations in
# jail.{conf,local} configuration files.
destemail = root@localhost

#
# ACTIONS
#

# Default banning action (e.g. iptables, iptables-new,
# iptables-multiport, shorewall, etc) It is used to define 
# action_* variables. Can be overriden globally or per 
# section within jail.local file
banaction = iptables-multiport

# email action. Since 0.8.1 upstream fail2ban uses sendmail
# MTA for the mailing. Change mta configuration parameter to mail
# if you want to revert to conventional 'mail'.
mta = sendmail

# Default protocol
protocol = tcp

#
# Action shortcuts. To be used to define action parameter

# The simplest action to take: ban only
action_ = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]

# ban & send an e-mail with whois report to the destemail.
action_mw = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]
              %(mta)s-whois[name=%(__name__)s, dest="%(destemail)s", protocol="%(protocol)s]

# ban & send an e-mail with whois report and relevant log lines
# to the destemail.
action_mwl = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]
               %(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s]

# Choose default action.  To change, just override value of 'action' with the
# interpolation to the chosen action shortcut (e.g.  action_mw, action_mwl, etc) in jail.local
# globally (section [DEFAULT]) or per specific section 
action = %(action_)s

#
# JAILS
#

# Next jails corresponds to the standard configuration in Fail2ban 0.6 which
# was shipped in Debian. Enable any defined here jail by including
#
# [SECTION_NAME] 
# enabled = true

#
# in /etc/fail2ban/jail.local.
#
# Optionally you may override any other parameter (e.g. banaction,
# action, port, logpath, etc) in that section within jail.local

[ssh]

enabled = true
port    = ssh
filter  = sshd
logpath  = /var/log/auth.log
maxretry = 4

# Generic filter for pam. Has to be used with action which bans all ports
# such as iptables-allports, shorewall
[pam-generic]

enabled = false
# pam-generic filter can be customized to monitor specific subset of 'tty's
filter  = pam-generic
# port actually must be irrelevant but lets leave it all for some possible uses
port = all
banaction = iptables-allports
port     = anyport
logpath  = /var/log/auth.log
maxretry = 6

[xinetd-fail]

enabled   = false
filter    = xinetd-fail
port      = all
banaction = iptables-multiport-log
logpath   = /var/log/daemon.log
maxretry  = 2


[ssh-ddos]

enabled = true
port    = ssh
filter  = sshd-ddos
logpath  = /var/log/auth.log
maxretry = 6

#
# HTTP servers
#

[apache]

enabled = false
port    = http,https
filter  = apache-auth
logpath = /var/log/apache*/*error.log
maxretry = 6

# default action is now multiport, so apache-multiport jail was left
# for compatibility with previous (<0.7.6-2) releases
[apache-multiport]

enabled   = false
port      = http,https
filter    = apache-auth
logpath   = /var/log/apache*/*error.log
maxretry  = 6

[apache-noscript]

enabled = false
port    = http,https
filter  = apache-noscript
logpath = /var/log/apache*/*error.log
maxretry = 6

[apache-overflows]

enabled = false
port    = http,https
filter  = apache-overflows
logpath = /var/log/apache*/*error.log
maxretry = 2

 [nginx-auth]
 enabled = true
 filter = nginx-auth
 action = iptables-multiport[name=NoAuthFailures, port="http,https"]
 logpath = /var/log/nginx*/*error*.log
 bantime = 600 # 10 minutes
 maxretry = 6

 [nginx-login]
 enabled = true
 filter = nginx-login
 action = iptables-multiport[name=NoLoginFailures, port="http,https"]
 logpath = /var/log/nginx*/*access*.log
 bantime = 600 # 10 minutes
 maxretry = 6

 [nginx-badbots]
 enabled  = true
 filter = apache-badbots
 action = iptables-multiport[name=BadBots, port="http,https"]
 logpath = /var/log/nginx*/*access*.log
 bantime = 86400 # 1 day
 maxretry = 1

 [nginx-noscript]
 enabled = true
 action = iptables-multiport[name=NoScript, port="http,https"]
 filter = nginx-noscript
 logpath = /var/log/nginx*/*access*.log
 maxretry = 6
 bantime  = 86400 # 1 day

 [nginx-proxy]
 enabled = true
 action = iptables-multiport[name=NoProxy, port="http,https"]
 filter = nginx-proxy
 logpath = /var/log/nginx*/*access*.log
 maxretry = 0
 bantime  = 86400 # 1 day


#
# FTP servers
#

[vsftpd]

enabled  = false
port     = ftp,ftp-data,ftps,ftps-data
filter   = vsftpd
logpath  = /var/log/vsftpd.log
# or overwrite it in jails.local to be
# logpath = /var/log/auth.log
# if you want to rely on PAM failed login attempts
# vsftpd's failregex should match both of those formats
maxretry = 6


[proftpd]

enabled  = false
port     = ftp,ftp-data,ftps,ftps-data
filter   = proftpd
logpath  = /var/log/proftpd/proftpd.log
maxretry = 6


[wuftpd]

enabled  = false
port     = ftp,ftp-data,ftps,ftps-data
filter   = wuftpd
logpath  = /var/log/auth.log
maxretry = 6


#
# Mail servers
#

[postfix]

enabled  = false
port     = smtp,ssmtp
filter   = postfix
logpath  = /var/log/mail.log


[couriersmtp]

enabled  = false
port     = smtp,ssmtp
filter   = couriersmtp
logpath  = /var/log/mail.log


#
# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
# all relevant ports get banned
#

[courierauth]

enabled  = false
port     = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
filter   = courierlogin
logpath  = /var/log/mail.log


[sasl]

enabled  = false
port     = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
filter   = sasl
# You might consider monitoring /var/log/warn.log instead
# if you are running postfix. See http://bugs.debian.org/507990
logpath  = /var/log/mail.log


# DNS Servers


# These jails block attacks against named (bind9). By default, logging is off
# with bind9 installation. You will need something like this:
#
# logging {
#     channel security_file {
#         file "/var/log/named/security.log" versions 3 size 30m;
#         severity dynamic;
#         print-time yes;
#     };
#     category security {
#         security_file;
#     };
# };
#
# in your named.conf to provide proper logging

# !!! WARNING !!!
#   Since UDP is connectionless protocol, spoofing of IP and immitation
#   of illegal actions is way too simple.  Thus enabling of this filter
#   might provide an easy way for implementing a DoS against a chosen
#   victim. See
#    http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
#   Please DO NOT USE this jail unless you know what you are doing.
#[named-refused-udp]
#
#enabled  = false
#port     = domain,953
#protocol = udp
#filter   = named-refused
#logpath  = /var/log/named/security.log

[named-refused-tcp]

enabled  = false
port     = domain,953
protocol = tcp
filter   = named-refused
logpath  = /var/log/named/security.log

私はちょうどエラーに気づいたfail2ban log：

2012-04-25 14：57：29,359 fail2ban.actions.action：エラーiptables -N fail2ban-ssh-ddos

Fail2Banはファイル/etc/fail2ban/jail.localを使用して[ssh]セクションを探し、そこでポートを変更できます。

[ssh]
enabled  = true
port     = ssh

port値は任意の正の整数に変更できます。

動作していないので、さらに調べたい場合は、を見て/etc/fail2ban/jail.confください。次のようなものがあります。

 logpath = /var/log/auth.log

これは、fail2banが誤ったログインを検出するために使用するものです。

正しく動作しない場合は、いくつかのことを試して問題を特定できます。インストールされているかどうかを確認することから始めます。

dpkg -l |grep fail   

サービスが実行されているかどうかを確認します。

/etc/init.d/fail2ban status 

SSH-jailがセットアップされているかどうかを確認します。

sudo fail2ban-client status  

ログファイルを確認します。

fail2ban-regex /var/log/auth.log /etc/fail2ban/filter.d/sshd.conf

日付/時刻を確認してください：

date && tail -2 /var/log/auth.log

（最初に日付を取得し、続いての最後の行を取得する必要がありますauth.log。それでもエラーを特定できない場合は、設定ファイルを投稿に追加します。

fail2banは、ログの内容でログイン試行を検出します。fail2banは、検出のためにポートを使用せず、ブロックするためだけに使用します。
適切なポートをブロックするには、iptableを正しくセットアップするためにfail2banを指定する必要があります。
に/etc/fail2ban/jail.local：

[ssh]
enabled  = true
port     = ssh   <-- just modify this with your port    port = 1234

別の方法は、問題のあるホストからすべてをブロックすることです。したがって、iptableはsshだけでなく、すべてのパケをドロップします。
の始めに/etc/fail2ban/jail.local：

banaction = iptables-multiport     <-- regular blocking (one or several ports)
banaction = iptables-allports      <-- block everything

ではiptables-allports、あなたのポートについて気にする必要はありません。デフォルトのものをそのままにしてください。

要するに、sshポート番号を変更した場合、jail.localファイルに追加する必要があります。

例：（ポート1234でSSH、SFTPを使用）

でjail.local：

[ssh]

enabled  = true

port     = ssh,sftp,1234

filter   = sshd

logpath  = /var/log/auth.log

maxretry = 6

私はこれが厳密に質問に答えているわけではないことを知っていますが、とにかく...

問題を解決する別の方法として、サーバー構成で標準ポートを維持し、ルーターでNATを実行することを検討できます。

たとえば、私の設定では、外部からのsshの標準ポートも使用していませんが、サーバー構成はsshの標準です（ftp、vpnなども同様です）、ルーターで非標準ポートを開いて、それらを標準ポートに転送します。

この方法により、セットアップの構成にかかる時間を大幅に節約できます。

私はこれが古いスレッドであることを知っていますが、これはこのテーマのグーグル検索でポップアップするものです。誰も最も正しい答え（imo）を出していないので、ここにあります。

Linuxの名前付きポート定義をグローバルに変更するには /etc/services

ssh             22/tcp
ssh             22/udp

fail2ban構成またはLinux名前付きポートを使用する他のアプリケーションで何かを変更する必要はありません。