HDMIはセーフモードで動作しますが、それ以外はあまり機能しません


14

ボードをHDMI入力としてモニターに接続しています。config.txtの「hdmi_safe = 1」のコメントを外すと、Raspbianデスクトップにアクセスできます。ただし、目が出血しない解像度で作業したいので、ここ数日間、config.txtで正しい設定を見つけようとしましたが、あきらめました。どんな助けも素晴らしいでしょう。いくつかのモードを試してみましたが、何を試しても、tvservice -sから次のような画像は表示されません。

pi@raspberrypi ~ $ /opt/vc/bin/tvservice -s
state: HPD low|HDMI off|NTSC mode|composite CP off (0x140001), 720x480 @ 60Hz, interlaced

この問題を解決するにはどのような手順が必要ですか?高度に感謝します。問題のモニターは、Acer H243HXです。

CEAテストの結果は次のとおりです。

pi@raspberrypi ~ $ /opt/vc/bin/tvservice -m CEA
Group CEA has 0 modes:

DMTテストの結果は次のとおりです。

pi@raspberrypi ~ $ /opt/vc/bin/tvservice -m DMT
Group DMT has 0 modes:

これが私のedidパーサーの出力です:

Parsing edid.dat...

HDMI:EDID version 1.3, 1 extensions, screen size 53x29 cm

HDMI:EDID features - videodef 0x80 standby suspend active off; colour  encoding:RGB444|YCbCr422; sRGB is not default colourspace; preferred format is native; does not support GTF

HDMI:EDID found monitor name descriptor tag 0xfc

HDMI:EDID monitor name is H243H

HDMI:EDID found monitor range descriptor tag 0xfd

HDMI:EDID monitor range offsets: V min=0, V max=0, H min=0, H max=0

HDMI:EDID monitor range: vertical is 56-76 Hz, horizontal is 31-83 kHz, max pixel clock is 180 MHz

HDMI:EDID monitor range does not support GTF

HDMI:EDID found monitor S/N descriptor tag 0xff

HDMI:EDID found unknown detail timing format: 1920x1080p hfp:48 hs:32 hbp:80 vfp:3 vs:5 vbp:23 pixel clock:138 MHz

HDMI:EDID established timing I/II bytes are AF CF 00

HDMI:EDID found DMT format: code 4, 640x480p @ 60 Hz in established timing I/II


HDMI:EDID found DMT format: code 5, 640x480p @ 72 Hz in established timing I/II

HDMI:EDID found DMT format: code 6, 640x480p @ 75 Hz in established timing I/II

HDMI:EDID found DMT format: code 8, 800x600p @ 56 Hz in established timing I/II

HDMI:EDID found DMT format: code 9, 800x600p @ 60 Hz in established timing I/II

HDMI:EDID found DMT format: code 10, 800x600p @ 72 Hz in established timing I/II

HDMI:EDID found DMT format: code 11, 800x600p @ 75 Hz in established timing I/II

HDMI:EDID found DMT format: code 16, 1024x768p @ 60 Hz in established timing I/II

HDMI:EDID found DMT format: code 17, 1024x768p @ 70 Hz in established timing I/II

HDMI:EDID found DMT format: code 18, 1024x768p @ 75 Hz in established timing I/II

HDMI:EDID found DMT format: code 36, 1280x1024p @ 75 Hz in established timing I/II

HDMI:EDID standard timings block x 8: 0x8180 714F 9500 950F A940 B300 0101 0101

HDMI:EDID found DMT format: code 35, 1280x1024p @ 60 Hz (5:4) in standard timing 0

HDMI:EDID found DMT format: code 21, 1152x864p @ 75 Hz (4:3) in standard timing 1

HDMI:EDID found DMT format: code 47, 1440x900p @ 60 Hz (16:10) in standard timing 2

HDMI:EDID found DMT format: code 48, 1440x900p @ 75 Hz (16:10) in standard timing 3

HDMI:EDID found DMT format: code 51, 1600x1200p @ 60 Hz (4:3) in standard timing 4

HDMI:EDID found DMT format: code 58, 1680x1050p @ 60 Hz (16:10) in standard timing 5

HDMI:EDID parsing v3 CEA extension 0

HDMI:EDID monitor support - underscan IT formats:yes, basic audio:yes, yuv444:yes, yuv422:yes, #native DTD:2

HDMI:EDID found preferred CEA detail timing format: 720x480p @ 60 Hz (2)

HDMI:EDID found CEA detail timing format: 1280x720p @ 60 Hz (4)

HDMI:EDID found CEA detail timing format: 1920x1080i @ 60 Hz (5)

HDMI:EDID found CEA detail timing format: 1280x720p @ 50 Hz (19)

HDMI:EDID found CEA detail timing format: 1920x1080i @ 50 Hz (20)

HDMI:EDID found audio format 2 channels PCM, sample rate: 32|44|48|88|96|176|192 kHz, sample size: 16|20|24 bits

HDMI:EDID found CEA format: code 1, 640x480p @ 60Hz

HDMI:EDID found CEA format: code 2, 720x480p @ 60Hz

HDMI:EDID found CEA format: code 3, 720x480p @ 60Hz

HDMI:EDID found CEA format: code 4, 1280x720p @ 60Hz (native)

HDMI:EDID found CEA format: code 5, 1920x1080i @ 60Hz

HDMI:EDID found CEA format: code 6, 1440x480i @ 60Hz

HDMI:EDID found CEA format: code 7, 1440x480i @ 60Hz

HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz

HDMI:EDID found CEA format: code 17, 720x576p @ 50Hz

HDMI:EDID found CEA format: code 18, 720x576p @ 50Hz

HDMI:EDID found CEA format: code 21, 1440x576i @ 50Hz

HDMI:EDID found CEA format: code 19, 1280x720p @ 50Hz (native)

HDMI:EDID found CEA format: code 31, 1920x1080p @ 50Hz

HDMI:EDID found CEA format: code 20, 1920x1080i @ 50Hz

HDMI:EDID found HDMI VSDB length 6

HDMI:EDID HDMI VSDB has physical address 1.0.0.0

HDMI:EDID HDMI VSDB supports AI:no, dual link DVI:no

HDMI:EDID HDMI VSDB deep colour support - 48-bit:no 36-bit:no 30-bit:yes DC_yuv444:no

HDMI:EDID HDMI VSDB has no latency information

HDMI:EDID filtering formats with pixel clock > 162 MHz or h. blanking
> 1023

HDMI:EDID best score mode is now CEA (1) 640x480p @ 60 Hz with pixel clock 25 MHz (score 136864)

HDMI:EDID best score mode is now CEA (2) 720x480p @ 60 Hz with pixel clock 27 MHz (score 5162208)

HDMI:EDID CEA mode (3) 720x480p @ 60 Hz with pixel clock 27 MHz has a score of 141472

HDMI:EDID CEA mode (4) 1280x720p @ 60 Hz with pixel clock 74 MHz has a score of 4765888

HDMI:EDID DMT mode (4) 640x480p @ 60 Hz with pixel clock 25 MHz has a score of 18432

HDMI:EDID CEA mode (5) 1920x1080i @ 60 Hz with pixel clock 74 MHz has a score of 4348832

HDMI:EDID DMT mode (5) 640x480p @ 72 Hz with pixel clock 31 MHz has a score of 22118

HDMI:EDID CEA mode (6) 1440x480i @ 60 Hz with pixel clock 27 MHz has a score of 120736

HDMI:EDID DMT mode (6) 640x480p @ 75 Hz with pixel clock 31 MHz has a score of 23040

HDMI:EDID CEA mode (7) 1440x480i @ 60 Hz with pixel clock 27 MHz has a score of 120736

HDMI:EDID DMT mode (8) 800x600p @ 56 Hz with pixel clock 36 MHz has a score of 26880

HDMI:EDID DMT mode (9) 800x600p @ 60 Hz with pixel clock 40 MHz has a score of 28800

HDMI:EDID DMT mode (10) 800x600p @ 72 Hz with pixel clock 50 MHz has a score of 34560

HDMI:EDID DMT mode (11) 800x600p @ 75 Hz with pixel clock 49 MHz has a score of 36000

HDMI:EDID CEA mode (16) 1920x1080p @ 60 Hz with pixel clock 148 MHz has a score of 348832

HDMI:EDID DMT mode (16) 1024x768p @ 60 Hz with pixel clock 65 MHz has a score of 47185

HDMI:EDID CEA mode (17) 720x576p @ 50 Hz with pixel clock 27 MHz has a score of 141472

HDMI:EDID DMT mode (17) 1024x768p @ 70 Hz with pixel clock 75 MHz has a score of 55050

HDMI:EDID CEA mode (18) 720x576p @ 50 Hz with pixel clock 27 MHz has a score of 141472

HDMI:EDID DMT mode (18) 1024x768p @ 75 Hz with pixel clock 78 MHz has a score of 58982

HDMI:EDID CEA mode (19) 1280x720p @ 50 Hz with pixel clock 74 MHz has a score of 3738240

HDMI:EDID CEA mode (20) 1920x1080i @ 50 Hz with pixel clock 74 MHz has a score of 3307360

HDMI:EDID CEA mode (21) 1440x576i @ 50 Hz with pixel clock 27 MHz has a score of 120736

HDMI:EDID DMT mode (21) 1152x864p @ 75 Hz with pixel clock 108 MHz has a score of 174649

HDMI:EDID CEA mode (31) 1920x1080p @ 50 Hz with pixel clock 148 MHz has a score of 307360

HDMI:EDID DMT mode (35) 1280x1024p @ 60 Hz with pixel clock 108 MHz has a score of 178643

HDMI:EDID DMT mode (36) 1280x1024p @ 75 Hz with pixel clock 135 MHz has a score of 98304

HDMI:EDID DMT mode (47) 1440x900p @ 60 Hz with pixel clock 106 MHz has a score of 177760

HDMI:EDID DMT mode (48) 1440x900p @ 75 Hz with pixel clock 136 MHz has a score of 197200

HDMI:EDID DMT mode (51) 1600x1200p @ 60 Hz with pixel clock 162 MHz has a score of 215200

HDMI:EDID DMT mode (58) 1680x1050p @ 60 Hz with pixel clock 146 MHz has a score of 205840

HDMI:EDID preferred mode remained as CEA (2) 720x480p @ 60 Hz with pixel clock 27 MHz

HDMI:EDID has HDMI support and audio support edid_parser exited with code 0

ケーブルは十分ですか?
トールビョーンラヴンアンデルセン

回答:


5

古い(少なくとも15年)Sharp Aquos LC-19A1Eテレビ/モニターと新しい512MbリビジョンB Raspberry Piがあります。オリジナルでconfig.txt、それは1080i 60Hzの画面を思い付きました。LXDEの画面解像度は1860xのようなものを言いましたか?(忘れてしまいました。)私のテレビのマニュアル(1366x768)に記載されている最大解像度をはるかに超えていました。

それでconfig.txtを編集してみました:

hdmi_group=2

そして

hdmi_mode=81

無効。

次に、このコマンドを最初の行として追加しました config.txt

hdmi_ignore_edid=0xa5000080

そして出来上がり、それは魅力のように動作します。ネイティブ解像度とテレビの鮮明なビュー。

また、より多くの程度config.txthttp://elinux.org/RPiconfig


2
hdmi_ignore_edit=0xa5000080システムにデバイスのEDID情報を無視するように指示し、必要なDMTまたはCEAモードを設定できるようにします。
HeatfanJohn

1

@Iamyrusが示唆するように、ファイルに入れhdmi_ignore_edid=0xa5000080てください/boot/config.txt

ただし、Acer H243HXモニターはネイティブ1920x1080であり、ディスプレイのEDIDブロックを編集するとCEAモード5がリストされるため、次の設定をお勧めします/boot/config.txt

hdmi_group=1
hdmi_mode=16

hdmi_ignore_edidconfig.txtに配置して実行するだけでも、これをテストできます。

/opt/vc/bin/tvservice -m "CEA 16"

EDID情報によると、CEA 16は次のとおりです。

HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz

弊社のサイトを使用することにより、あなたは弊社のクッキーポリシーおよびプライバシーポリシーを読み、理解したものとみなされます。
Licensed under cc by-sa 3.0 with attribution required.