UIViewの下枠?


145

a UIScrollView *toScrollView(画面の幅)に、灰色の下部境界線を追加します(iPhoneのネイティブメッセージアプリの作成ビューのtoフィールドの境界線とまったく同じです)。

これを実現するために、Cocoa Touch:UIViewの境界線の色と太さを変更する方法をフォローしましたちょうどカスタムでトップの境界線をカバーUINavigationBarして作られたtoScrollViewので、左&右の境界線だけで画面オフになっていることを322幅x座標さんを-1&。

これは問題ないように見えますが、一種のハックであり、これを行うためのより良い方法があるかどうか疑問に思っていました。

- (void)viewDidLoad {
    [super viewDidLoad];

    // Add UINavigationBar *navigationBar at top.
    self.navigationItem.leftBarButtonItem = [[UIBarButtonItem alloc]
                                             initWithBarButtonSystemItem:UIBarButtonSystemItemCancel
                                             target:self action:@selector(cancelAction)];
    UINavigationBar *navigationBar = [[UINavigationBar alloc]
                                      initWithFrame:CGRectMake(0.0f, 0.0f, 320.0f, 44.0f)];
    navigationBar.items = [NSArray arrayWithObject:self.navigationItem];

    // Add UIScrollView *toScrollView below navigationBar.
    UIScrollView *toScrollView = [[UIScrollView alloc]
                                  initWithFrame:CGRectMake(-1.0f, 43.0f, 322.0f, 45.0f)];
    toScrollView.backgroundColor = [UIColor whiteColor];
    toScrollView.layer.borderColor = [UIColor colorWithWhite:0.8f alpha:1.0f].CGColor;
    toScrollView.layer.borderWidth = 1.0f;
    [self.view addSubview:toScrollView];
    [self.view addSubview:navigationBar]; // covers top of toScrollView
}

UIViewの任意の側にレイヤーベースまたはビューベースの境界線を作成できる便利なUIViewカテゴリは
次のとおりです。UIView

回答:


257

UIView@ImreKelényiが示唆するように、を使用する代わりに、を使用できますCALayer

// Add a bottomBorder.
CALayer *bottomBorder = [CALayer layer];

bottomBorder.frame = CGRectMake(0.0f, 43.0f, toScrollView.frame.size.width, 1.0f);

bottomBorder.backgroundColor = [UIColor colorWithWhite:0.8f 
                                                 alpha:1.0f].CGColor;

[toScrollView.layer addSublayer:bottomBorder];

25
#import <QuartzCore / QuartzCore.h>を忘れないでください
カイルクレッグ

3
QuartzCore frameworkコンパイラエラーが発生する可能性があるため、プロジェクトがない場合は、プロジェクトに追加する必要がある場合もあります。
ノミ2013

2
@Fleaはモジュールを有効にしたので、QuartzCore.frameworkこれ以上追加する必要はありません。
ma11hew28 2013

3
あなたは変更することができます43.0ftoScrollView.frame.size.height、それが一番下にあることを確認するために
mparryy

19
このようなCALayerを使用することの大きな問題は、修正されたことです。ビューのサイズが変化すると(デバイスの回転、自動レイアウトなど)、CALayerは自動的に調整されません。自分で設定する必要があります。一方、drawRectを使用すると、変更を自動的に処理できます。
Womble、2015

78

以下は、UIViewサブクラスのボーダーを作成するためのより一般化されたSwift拡張です。

import UIKit

extension UIView {      
  func addTopBorderWithColor(color: UIColor, width: CGFloat) {
    let border = CALayer()
    border.backgroundColor = color.CGColor
    border.frame = CGRectMake(0, 0, self.frame.size.width, width)
    self.layer.addSublayer(border)
  }

  func addRightBorderWithColor(color: UIColor, width: CGFloat) {
    let border = CALayer()
    border.backgroundColor = color.CGColor
    border.frame = CGRectMake(self.frame.size.width - width, 0, width, self.frame.size.height)
    self.layer.addSublayer(border)
  }

  func addBottomBorderWithColor(color: UIColor, width: CGFloat) {
    let border = CALayer()
    border.backgroundColor = color.CGColor
    border.frame = CGRectMake(0, self.frame.size.height - width, self.frame.size.width, width)
    self.layer.addSublayer(border)
  }

  func addLeftBorderWithColor(color: UIColor, width: CGFloat) {
    let border = CALayer()
    border.backgroundColor = color.CGColor
    border.frame = CGRectMake(0, 0, width, self.frame.size.height)
    self.layer.addSublayer(border)
  }
}

スウィフト3

extension UIView {
    func addTopBorderWithColor(color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.cgColor
        border.frame = CGRect(x: 0, y: 0, width: self.frame.size.width, height: width)
        self.layer.addSublayer(border)
    }

    func addRightBorderWithColor(color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.cgColor
        border.frame = CGRect(x: self.frame.size.width - width, y: 0, width: width, height: self.frame.size.height)
        self.layer.addSublayer(border)
    }

    func addBottomBorderWithColor(color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.cgColor
        border.frame = CGRect(x: 0, y: self.frame.size.height - width, width: self.frame.size.width, height: width)
        self.layer.addSublayer(border)
    }

    func addLeftBorderWithColor(color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.cgColor
        border.frame = CGRect(x: 0, y: 0, width: width, height: self.frame.size.height)
        self.layer.addSublayer(border)
    }
}

2
あなたは、各FUNCでこれを使用して(場合には、これはループ内で呼び出される)以前に追加されたサブレイヤを削除する場合があります-許可すればsubLayerArray = {{subLayerArray layer.removeFromSuperlayer()}での層のための} self.layer.sublayers
ニティンナイン

1
記載されている幅とは何ですか?
G.Abhisek

Swift 3.0での使用border.frame = CGRect(x: 0, y: 0, width: self.frame.size.width, height: width)など
lenooh

@NitinNain慎重に、意図よりも多くのレイヤーを削除します。たとえば、UIView.layerのすべてのレイヤーを削除すると、キーボードを表示したときにクラッシュが発生する可能性が高くなります...
xaphod

60

以下のカテゴリに実装されています:

UIButton + Border.h:

@interface UIButton (Border)

- (void)addBottomBorderWithColor: (UIColor *) color andWidth:(CGFloat) borderWidth;

- (void)addLeftBorderWithColor: (UIColor *) color andWidth:(CGFloat) borderWidth;

- (void)addRightBorderWithColor: (UIColor *) color andWidth:(CGFloat) borderWidth;

- (void)addTopBorderWithColor: (UIColor *) color andWidth:(CGFloat) borderWidth;

@end

UIButton + Border.m:

@implementation UIButton (Border)

- (void)addTopBorderWithColor:(UIColor *)color andWidth:(CGFloat) borderWidth {
    CALayer *border = [CALayer layer];
    border.backgroundColor = color.CGColor;

    border.frame = CGRectMake(0, 0, self.frame.size.width, borderWidth);
    [self.layer addSublayer:border];
}

- (void)addBottomBorderWithColor:(UIColor *)color andWidth:(CGFloat) borderWidth {
    CALayer *border = [CALayer layer];
    border.backgroundColor = color.CGColor;

    border.frame = CGRectMake(0, self.frame.size.height - borderWidth, self.frame.size.width, borderWidth);
    [self.layer addSublayer:border];
}

- (void)addLeftBorderWithColor:(UIColor *)color andWidth:(CGFloat) borderWidth {
    CALayer *border = [CALayer layer];
    border.backgroundColor = color.CGColor;

    border.frame = CGRectMake(0, 0, borderWidth, self.frame.size.height);
    [self.layer addSublayer:border];
}

- (void)addRightBorderWithColor:(UIColor *)color andWidth:(CGFloat) borderWidth {
    CALayer *border = [CALayer layer];
    border.backgroundColor = color.CGColor;

    border.frame = CGRectMake(self.frame.size.width - borderWidth, 0, borderWidth, self.frame.size.height);
    [self.layer addSublayer:border];
}

@end

7
いい仕事ですが、UIButtonに固有のこのコードについて何かありますか?UIViewに追加した方がいいでしょうか。
14

5
素晴らしいスニペット。これをリファクタリングしてSwiftに変換しました。あなたはここでそれを見つけることができます。
Isuru

ボタンのメインレイヤーに境界線の半径がある場合はどうなりますか?
15年

@abboodがUIViewのカテゴリにすることにも同意します。だけど価値あり。
ロバートJ.クレッグ2015

ええ、それはUIViewでうまく動作します。関連質問:自動レイアウトでこれを機能させる方法は?もちろん、フレームが変更された場合は、ボーダーをそのまま再描画する必要があります。
elsurudo 2016年

26

スウィフト4

(すべての画面サイズに対して)本当に順応性のあるソリューションが必要な場合は、次のとおりです。

/**
* Extends UIView with shortcut methods
*
* @author Alexander Volkov
* @version 1.0
*/
extension UIView {

    /// Adds bottom border to the view with given side margins
    ///
    /// - Parameters:
    ///   - color: the border color
    ///   - margins: the left and right margin
    ///   - borderLineSize: the size of the border
    func addBottomBorder(color: UIColor = UIColor.red, margins: CGFloat = 0, borderLineSize: CGFloat = 1) {
        let border = UIView()
        border.backgroundColor = color
        border.translatesAutoresizingMaskIntoConstraints = false
        self.addSubview(border)
        border.addConstraint(NSLayoutConstraint(item: border,
                                                attribute: .height,
                                                relatedBy: .equal,
                                                toItem: nil,
                                                attribute: .height,
                                                multiplier: 1, constant: borderLineSize))
        self.addConstraint(NSLayoutConstraint(item: border,
                                              attribute: .bottom,
                                              relatedBy: .equal,
                                              toItem: self,
                                              attribute: .bottom,
                                              multiplier: 1, constant: 0))
        self.addConstraint(NSLayoutConstraint(item: border,
                                              attribute: .leading,
                                              relatedBy: .equal,
                                              toItem: self,
                                              attribute: .leading,
                                              multiplier: 1, constant: margins))
        self.addConstraint(NSLayoutConstraint(item: border,
                                              attribute: .trailing,
                                              relatedBy: .equal,
                                              toItem: self,
                                              attribute: .trailing,
                                              multiplier: 1, constant: margins))
    }
}

@DanielBeltrami私は同意しますが、受理された後にレビューアに新しい回答をチェックさせる方法はありません。
Alexander Volkov

19

UIView1ポイントの高さと灰色の背景色を持つ個別のを追加して、self.viewそのすぐ下に配置できますtoScrollView

編集:正当な理由がない限り(CALayerで提供されていないUIViewのサービスを使用したい場合)、@ MattDiPasqualeが示唆するようにCALayerを使用する必要があります。UIViewはオーバーヘッドが大きく、ほとんどの場合問題にはなりませんが、それでも他のソリューションの方がエレガントです。


13

Swift 4のソリューション

let bottomBorder = CALayer()
        bottomBorder.frame = CGRect(x: 0.0, y: calendarView.frame.size.height-1, width: calendarView.frame.width, height: 1.0)
        bottomBorder.backgroundColor = #colorLiteral(red: 0.8039215803, green: 0.8039215803, blue: 0.8039215803, alpha: 1)
        calendarView.layer.addSublayer(bottomBorder)

BackgroundColor lightGray。必要に応じて色を変更します。


11

ボーダー機能を削除したコードも改善されています。confileの回答に基づく。

import UIKit

enum viewBorder: String {
    case Left = "borderLeft"
    case Right = "borderRight"
    case Top = "borderTop"
    case Bottom = "borderBottom"
}

extension UIView {

    func addBorder(vBorder: viewBorder, color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.CGColor
        border.name = vBorder.rawValue
        switch vBorder {
            case .Left:
                border.frame = CGRectMake(0, 0, width, self.frame.size.height)
            case .Right:
                border.frame = CGRectMake(self.frame.size.width - width, 0, width, self.frame.size.height)
            case .Top:
                border.frame = CGRectMake(0, 0, self.frame.size.width, width)
            case .Bottom:
                border.frame = CGRectMake(0, self.frame.size.height - width, self.frame.size.width, width)
        }
        self.layer.addSublayer(border)
    }

    func removeBorder(border: viewBorder) {
        var layerForRemove: CALayer?
        for layer in self.layer.sublayers! {
            if layer.name == border.rawValue {
                layerForRemove = layer
            }
        }
        if let layer = layerForRemove {
            layer.removeFromSuperlayer()
        }
    }

}

アップデート:Swift 3

import UIKit

enum ViewBorder: String {
    case left, right, top, bottom
}

extension UIView {

    func add(border: ViewBorder, color: UIColor, width: CGFloat) {
        let borderLayer = CALayer()
        borderLayer.backgroundColor = color.cgColor
        borderLayer.name = border.rawValue
        switch border {
        case .left:
            borderLayer.frame = CGRect(x: 0, y: 0, width: width, height: self.frame.size.height)
        case .right:
            borderLayer.frame = CGRect(x: self.frame.size.width - width, y: 0, width: width, height: self.frame.size.height)
        case .top:
            borderLayer.frame = CGRect(x: 0, y: 0, width: self.frame.size.width, height: width)
        case .bottom:
            borderLayer.frame = CGRect(x: 0, y: self.frame.size.height - width, width: self.frame.size.width, height: width)
        }
        self.layer.addSublayer(borderLayer)
    }

    func remove(border: ViewBorder) {
        guard let sublayers = self.layer.sublayers else { return }
        var layerForRemove: CALayer?
        for layer in sublayers {
            if layer.name == border.rawValue {
                layerForRemove = layer
            }
        }
        if let layer = layerForRemove {
            layer.removeFromSuperlayer()
        }
    }

}

素敵な拡張。削除を少し整理しました。 func remove(border: ViewBorder) { layer.sublayers? .compactMap { $0 } .filter { $0.name == border.rawValue } .forEach { $0.removeFromSuperlayer() } }
Matthew Korporaal

7

これらの拡張メソッドの問題は、UIView / UIButtonが後でサイズを調整するときに、CALayerのサイズを変更して新しいサイズに合わせることができないことです。それはあなたが置き違えた境界をあなたに残すでしょう。UIButtonをサブクラス化した方がよいことがわかりました。もちろん、他のUIViewもサブクラス化できます。ここにいくつかのコードがあります:

enum BorderedButtonSide {
    case Top, Right, Bottom, Left
}


class BorderedButton : UIButton {

    private var borderTop: CALayer?
    private var borderTopWidth: CGFloat?
    private var borderRight: CALayer?
    private var borderRightWidth: CGFloat?
    private var borderBottom: CALayer?
    private var borderBottomWidth: CGFloat?
    private var borderLeft: CALayer?
    private var borderLeftWidth: CGFloat?


    func setBorder(side: BorderedButtonSide, _ color: UIColor, _ width: CGFloat) {

        let border = CALayer()
        border.backgroundColor = color.CGColor

        switch side {
        case .Top:
            border.frame = CGRect(x: 0, y: 0, width: frame.size.width, height: width)
            borderTop?.removeFromSuperlayer()
            borderTop = border
            borderTopWidth = width
        case .Right:
            border.frame = CGRect(x: frame.size.width - width, y: 0, width: width, height: frame.size.height)
            borderRight?.removeFromSuperlayer()
            borderRight = border
            borderRightWidth = width
        case .Bottom:
            border.frame = CGRect(x: 0, y: frame.size.height - width, width: frame.size.width, height: width)
            borderBottom?.removeFromSuperlayer()
            borderBottom = border
            borderBottomWidth = width
        case .Left:
            border.frame = CGRect(x: 0, y: 0, width: width, height: frame.size.height)
            borderLeft?.removeFromSuperlayer()
            borderLeft = border
            borderLeftWidth = width
        }

        layer.addSublayer(border)
    }

    override func layoutSubviews() {
        super.layoutSubviews()
        borderTop?.frame = CGRect(x: 0, y: 0, width: frame.size.width, height: borderTopWidth!)
        borderRight?.frame = CGRect(x: frame.size.width - borderRightWidth!, y: 0, width: borderRightWidth!, height: frame.size.height)
        borderBottom?.frame = CGRect(x: 0, y: frame.size.height - borderBottomWidth!, width: frame.size.width, height: borderBottomWidth!)
        borderLeft?.frame = CGRect(x: 0, y: 0, width: borderLeftWidth!, height: frame.size.height)
    }

}

素敵な解決策!共有していただきありがとうございます。
トーマスCalmon

7

または、最もパフォーマンスに配慮した方法は、単純にそのようにdrawRectをオーバーロードすることです。

@interface TPActionSheetButton : UIButton

@property (assign) BOOL drawsTopLine;
@property (assign) BOOL drawsBottomLine;
@property (assign) BOOL drawsRightLine;
@property (assign) BOOL drawsLeftLine;
@property (strong, nonatomic) UIColor * lineColor;

@end

@implementation TPActionSheetButton

- (void) drawRect:(CGRect)rect
{
    CGContextRef ctx = UIGraphicsGetCurrentContext();

    CGContextSetLineWidth(ctx, 0.5f * [[UIScreen mainScreen] scale]);
    CGFloat red, green, blue, alpha;
    [self.lineColor getRed:&red green:&green blue:&blue alpha:&alpha];
    CGContextSetRGBStrokeColor(ctx, red, green, blue, alpha);

    if(self.drawsTopLine) {
        CGContextBeginPath(ctx);
        CGContextMoveToPoint(ctx, CGRectGetMinX(rect), CGRectGetMinY(rect));
        CGContextAddLineToPoint(ctx, CGRectGetMaxX(rect), CGRectGetMinY(rect));
        CGContextStrokePath(ctx);
    }
    if(self.drawsBottomLine) {
        CGContextBeginPath(ctx);
        CGContextMoveToPoint(ctx, CGRectGetMinX(rect), CGRectGetMaxY(rect));
        CGContextAddLineToPoint(ctx, CGRectGetMaxX(rect), CGRectGetMaxY(rect));
        CGContextStrokePath(ctx);
    }
    if(self.drawsLeftLine) {
        CGContextBeginPath(ctx);
        CGContextMoveToPoint(ctx, CGRectGetMinX(rect), CGRectGetMinY(rect));
        CGContextAddLineToPoint(ctx, CGRectGetMinX(rect), CGRectGetMaxY(rect));
        CGContextStrokePath(ctx);
    }
    if(self.drawsRightLine) {
        CGContextBeginPath(ctx);
        CGContextMoveToPoint(ctx, CGRectGetMaxX(rect), CGRectGetMinY(rect));
        CGContextAddLineToPoint(ctx, CGRectGetMaxX(rect), CGRectGetMaxY(rect));
        CGContextStrokePath(ctx);
    }

    [super drawRect:rect];
}

@end

6
オーバーライドdrawRect:は必ずしもパフォーマンスに適しているとは限りません。レイヤーを使用するとパフォーマンスが大幅に向上すると確信しています。
ThomasW 2014年

1
@ThomasWしかし、デバイスの回転に応じて境界が変化するとどうなりますか?または分割ビュー?または自動レイアウトは何をしますか?
ウォンブル2015

@Womble setFrame:setBounds:またはlayoutSubviewsメソッドのオーバーライドでレイヤーを更新する必要があります。
ThomasW 2015

layoutSublayersOfLayer:代わりに、setFrame:または他のいずれかをお勧めします
公園。

5

Confileの回答のSwift 3バージョン:

import UIKit

extension UIView {
    func addTopBorderWithColor(color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.cgColor
        border.frame = CGRect(x: 0, y: 0, width: self.frame.size.width, height: width)
        self.layer.addSublayer(border)
    }

    func addRightBorderWithColor(color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.cgColor
        border.frame = CGRect(x: self.frame.size.width - width, y: 0, width: width, height: self.frame.size.height)
        self.layer.addSublayer(border)
    }

    func addBottomBorderWithColor(color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.cgColor
        border.frame = CGRect(x: 0, y: self.frame.size.height - width, width: self.frame.size.width, height: width)
        self.layer.addSublayer(border)
    }

    func addLeftBorderWithColor(color: UIColor, width: CGFloat) {
        let border = CALayer()
        border.backgroundColor = color.cgColor
        border.frame = CGRect(x: 0, y: 0, width: width, height: self.frame.size.height)
        self.layer.addSublayer(border)
    }
}

自動レイアウトを使用する場合の使用法:

class CustomView: UIView {

    override func awakeFromNib() {
        super.awakeFromNib()
    }

    override func layoutSubviews() {
        addBottomBorderWithColor(color: UIColor.white, width: 1)
    }
}

iPadおよびiPhone plusデバイスでは、画面全体に線が表示されません。この@ spogebob92の修正はありますか
Grumme

自動レイアウトが完了したので、ボーダーを追加する前に、おそらくlayoutIfNeeded()を呼び出します
spogebob92

5

制約を使用する場合(フレームサイズがない場合)、必要な制約を含む境界線ビューを追加できます。

// MARK: - Add a border to one side of a view

public enum BorderSide {
    case top, bottom, left, right
}

extension UIView {
    public func addBorder(side: BorderSide, color: UIColor, width: CGFloat) {
        let border = UIView()
        border.translatesAutoresizingMaskIntoConstraints = false
        border.backgroundColor = color
        self.addSubview(border)

        let topConstraint = topAnchor.constraint(equalTo: border.topAnchor)
        let rightConstraint = trailingAnchor.constraint(equalTo: border.trailingAnchor)
        let bottomConstraint = bottomAnchor.constraint(equalTo: border.bottomAnchor)
        let leftConstraint = leadingAnchor.constraint(equalTo: border.leadingAnchor)
        let heightConstraint = border.heightAnchor.constraint(equalToConstant: width)
        let widthConstraint = border.widthAnchor.constraint(equalToConstant: width)


        switch side {
        case .top:
            NSLayoutConstraint.activate([leftConstraint, topConstraint, rightConstraint, heightConstraint])
        case .right:
            NSLayoutConstraint.activate([topConstraint, rightConstraint, bottomConstraint, widthConstraint])
        case .bottom:
            NSLayoutConstraint.activate([rightConstraint, bottomConstraint, leftConstraint, heightConstraint])
        case .left:
            NSLayoutConstraint.activate([bottomConstraint, leftConstraint, topConstraint, widthConstraint])
        }
    }
}

次に、以下のように設定します

myButton.addBorder(side: .left, color: UIColor.lightGray, width: 1)

この答えに触発され


拡張機能が大好きです。ミルありがとう!
フィリップジェイコブス

5

迅速

UIView拡張を作成する

private var bottomLineColorAssociatedKey : UIColor = .black
private var topLineColorAssociatedKey : UIColor = .black
private var rightLineColorAssociatedKey : UIColor = .black
private var leftLineColorAssociatedKey : UIColor = .black
extension UIView {

@IBInspectable var bottomLineColor: UIColor {
    get {
        if let color = objc_getAssociatedObject(self, &bottomLineColorAssociatedKey) as? UIColor {
            return color
        } else {
            return .black
        }
    } set {
        objc_setAssociatedObject(self, &bottomLineColorAssociatedKey, newValue, .OBJC_ASSOCIATION_RETAIN)
    }
}
@IBInspectable var bottomLineWidth: CGFloat {
    get {
        return self.bottomLineWidth
    }
    set {
        DispatchQueue.main.async {
            self.addBottomBorderWithColor(color: self.bottomLineColor, width: newValue)
        }
    }
}
@IBInspectable var topLineColor: UIColor {
    get {
        if let color = objc_getAssociatedObject(self, &topLineColorAssociatedKey) as? UIColor {
            return color
        } else {
            return .black
        }
    } set {
        objc_setAssociatedObject(self, &topLineColorAssociatedKey, newValue, .OBJC_ASSOCIATION_RETAIN)
    }
}
@IBInspectable var topLineWidth: CGFloat {
    get {
        return self.topLineWidth
    }
    set {
        DispatchQueue.main.async {
            self.addTopBorderWithColor(color: self.topLineColor, width: newValue)
        }
    }
}
@IBInspectable var rightLineColor: UIColor {
    get {
        if let color = objc_getAssociatedObject(self, &rightLineColorAssociatedKey) as? UIColor {
            return color
        } else {
            return .black
        }
    } set {
        objc_setAssociatedObject(self, &rightLineColorAssociatedKey, newValue, .OBJC_ASSOCIATION_RETAIN)
    }
}
@IBInspectable var rightLineWidth: CGFloat {
    get {
        return self.rightLineWidth
    }
    set {
        DispatchQueue.main.async {
            self.addRightBorderWithColor(color: self.rightLineColor, width: newValue)
        }
    }
}
@IBInspectable var leftLineColor: UIColor {
    get {
        if let color = objc_getAssociatedObject(self, &leftLineColorAssociatedKey) as? UIColor {
            return color
        } else {
            return .black
        }
    } set {
        objc_setAssociatedObject(self, &leftLineColorAssociatedKey, newValue, .OBJC_ASSOCIATION_RETAIN)
    }
}
@IBInspectable var leftLineWidth: CGFloat {
    get {
        return self.leftLineWidth
    }
    set {
        DispatchQueue.main.async {
            self.addLeftBorderWithColor(color: self.leftLineColor, width: newValue)
        }
    }
}
func addTopBorderWithColor(color: UIColor, width: CGFloat) {
    let border = CALayer()
    border.name = "topBorderLayer"
    removePreviouslyAddedLayer(name: border.name ?? "")
    border.backgroundColor = color.cgColor
    border.frame = CGRect(x: 0, y : 0,width: self.frame.size.width, height: width)
    self.layer.addSublayer(border)
    self.addObserver(self, forKeyPath: #keyPath(UIView.bounds), options: .new, context: UnsafeMutableRawPointer(bitPattern: 1111) )
}

func addRightBorderWithColor(color: UIColor, width: CGFloat) {
    let border = CALayer()
    border.name = "rightBorderLayer"
    removePreviouslyAddedLayer(name: border.name ?? "")
    border.backgroundColor = color.cgColor
    border.frame = CGRect(x: self.frame.size.width - width, y: 0, width : width, height :self.frame.size.height)
    self.layer.addSublayer(border)
     self.addObserver(self, forKeyPath: #keyPath(UIView.bounds), options: .new, context: UnsafeMutableRawPointer(bitPattern: 2222) )
}

func addBottomBorderWithColor(color: UIColor, width: CGFloat) {
    let border = CALayer()
    border.name = "bottomBorderLayer"
    removePreviouslyAddedLayer(name: border.name ?? "")
    border.backgroundColor = color.cgColor
    border.frame = CGRect(x: 0, y: self.frame.size.height - width,width : self.frame.size.width,height: width)
    self.layer.addSublayer(border)
    self.addObserver(self, forKeyPath: #keyPath(UIView.bounds), options: .new, context: UnsafeMutableRawPointer(bitPattern: 3333) )
}
func addLeftBorderWithColor(color: UIColor, width: CGFloat) {
    let border = CALayer()
    border.name = "leftBorderLayer"
    removePreviouslyAddedLayer(name: border.name ?? "")
    border.backgroundColor = color.cgColor
    border.frame = CGRect(x:0, y:0,width : width, height : self.frame.size.height)
    self.layer.addSublayer(border)
    self.addObserver(self, forKeyPath: #keyPath(UIView.bounds), options: .new, context: UnsafeMutableRawPointer(bitPattern: 4444) )
}
override open func observeValue(forKeyPath keyPath: String?, of object: Any?, change: [NSKeyValueChangeKey : Any]?, context: UnsafeMutableRawPointer?) {

    if let objectView = object as? UIView,
        objectView === self,
        keyPath == #keyPath(UIView.bounds) {
        switch context {
        case UnsafeMutableRawPointer(bitPattern: 1111):
            for border in self.layer.sublayers ?? [] {
                if border.name == "topBorderLayer" {
                    border.frame = CGRect(x: 0, y : 0,width: self.frame.size.width, height: border.frame.height)
                }
            }
        case UnsafeMutableRawPointer(bitPattern: 2222):
            for border in self.layer.sublayers ?? [] {
                if border.name == "rightBorderLayer" {
                     border.frame = CGRect(x: self.frame.size.width - border.frame.width, y: 0, width : border.frame.width, height :self.frame.size.height)
                }
            }
        case UnsafeMutableRawPointer(bitPattern: 3333):
            for border in self.layer.sublayers ?? [] {
                if border.name == "bottomBorderLayer" {
                    border.frame = CGRect(x: 0, y: self.frame.size.height - border.frame.height,width : self.frame.size.width,height: border.frame.height)
                }
            }
        case UnsafeMutableRawPointer(bitPattern: 4444):
            for border in self.layer.sublayers ?? [] {
                if border.name == "leftBorderLayer" {
                   border.frame = CGRect(x:0, y:0,width : border.frame.width, height : self.frame.size.height)
                }
            }
        default:
            break
        }
    }
}
func removePreviouslyAddedLayer(name : String) {
    if self.layer.sublayers?.count ?? 0 > 0 {
        self.layer.sublayers?.forEach {
            if $0.name == name {
                $0.removeFromSuperlayer()
            }
        }
    }
   }
}

目的C

UIViewのカテゴリクラスを作成する

UIView + Border.h

#import <UIKit/UIKit.h>
#import <Foundation/Foundation.h>
@interface UIView (Border) 

@property (nonatomic) IBInspectable UIColor *topLineColor;
@property (nonatomic) IBInspectable CGFloat topLineWidth;
@property (nonatomic) IBInspectable UIColor *bottomLineColor;
@property (nonatomic) IBInspectable CGFloat bottomLineWidth;
@property (nonatomic) IBInspectable UIColor *rightLineColor;
@property (nonatomic) IBInspectable CGFloat rightLineWidth;
@property (nonatomic) IBInspectable UIColor *leftLineColor;
@property (nonatomic) IBInspectable CGFloat leftLineWidth;

- (void)addBottomBorderWithColor: (UIColor *) color andWidth:(CGFloat) borderWidth;

- (void)addLeftBorderWithColor: (UIColor *) color andWidth:(CGFloat) borderWidth;

- (void)addRightBorderWithColor: (UIColor *) color andWidth:(CGFloat) borderWidth;

- (void)addTopBorderWithColor: (UIColor *) color andWidth:(CGFloat) borderWidth;

@end

UIView + Border.m

static void *topBorderContext = &topBorderContext;
static void *bottomBorderContext = &bottomBorderContext;
static void *leftBorderContext = &leftBorderContext;
static void *rightBorderContext = &rightBorderContext;
static char bottomLineColorKey,topLineColorKey,rightLineColorKey,leftLineColorKey;
@implementation UIView(Utility)
@dynamic borderColor,borderWidth,cornerRadius,bottomLineWidth,topLineWidth,rightLineWidth,leftLineWidth;

-(void)setBorderColor:(UIColor *)borderColor{
    [self.layer setBorderColor:borderColor.CGColor];
}

-(void)setBorderWidth:(CGFloat)borderWidth{
    [self.layer setBorderWidth:borderWidth];
}

-(void)setCornerRadius:(CGFloat)cornerRadius{
    [self.layer setCornerRadius:cornerRadius];
}
// for Bottom Line
- (UIColor *)bottomLineColor {
    return objc_getAssociatedObject(self, &bottomLineColorKey);
}
- (void)setBottomLineColor:(UIColor *)bottomLineColor {
    objc_setAssociatedObject(self, &bottomLineColorKey,
                             bottomLineColor, OBJC_ASSOCIATION_RETAIN_NONATOMIC);
}
-(void)setBottomLineWidth:(CGFloat)bottomLineWidth {
    [self addBottomBorderWithColor:[self bottomLineColor] andWidth:bottomLineWidth];
}
// for top Line
- (UIColor *)topLineColor {
    return objc_getAssociatedObject(self, &topLineColorKey);
}
- (void)setTopLineColor:(UIColor *)topLineColor {
    objc_setAssociatedObject(self, &topLineColorKey,
                             topLineColor, OBJC_ASSOCIATION_RETAIN_NONATOMIC);
}
- (void)setTopLineWidth:(CGFloat)topLineWidth{
    [self addTopBorderWithColor:[self topLineColor] andWidth:topLineWidth];
}
// for right Line
- (UIColor *)rightLineColor {
    return objc_getAssociatedObject(self, &rightLineColorKey);
}
-(void)setRightLineColor:(UIColor *)rightLineColor {
    objc_setAssociatedObject(self, &rightLineColorKey,
                             rightLineColor, OBJC_ASSOCIATION_RETAIN_NONATOMIC);
}
-(void)setRightLineWidth:(CGFloat)rightLineWidth{
    [self addRightBorderWithColor:[self rightLineColor] andWidth:rightLineWidth];
}
// for left Line
-(UIColor *)leftLineColor {
    return objc_getAssociatedObject(self, &leftLineColorKey);
}
-(void)setLeftLineColor:(UIColor *)leftLineColor{
    objc_setAssociatedObject(self, &leftLineColorKey,
                             leftLineColor, OBJC_ASSOCIATION_RETAIN_NONATOMIC);
}
-(void)setLeftLineWidth:(CGFloat)leftLineWidth{
    [self addLeftBorderWithColor:[self leftLineColor] andWidth:leftLineWidth];
}

- (void)addTopBorderWithColor:(UIColor *)color andWidth:(CGFloat) borderWidth {
    dispatch_async(dispatch_get_main_queue(), ^{
        CALayer *border = [CALayer layer];
        border.name = @"topBorderLayer";
        [self removePreviouslyAddedLayer:border.name];
        border.backgroundColor = color.CGColor;
        border.frame = CGRectMake(0, 0, self.frame.size.width, borderWidth);
        [self.layer addSublayer:border];
        [self addObserver:self forKeyPath: @"bounds" options:NSKeyValueObservingOptionNew context:topBorderContext];
    });
}

- (void)addBottomBorderWithColor:(UIColor *)color andWidth:(CGFloat) borderWidth {
    dispatch_async(dispatch_get_main_queue(), ^{
        CALayer *border = [CALayer layer];
        border.name = @"bottomBorderLayer";
        [self removePreviouslyAddedLayer:border.name];
        border.backgroundColor = color.CGColor;
        border.frame = CGRectMake(0, self.frame.size.height - borderWidth, self.frame.size.width, borderWidth);
        [self.layer addSublayer:border];
        [self addObserver:self forKeyPath: @"bounds" options:NSKeyValueObservingOptionNew context:bottomBorderContext];
    });
}

- (void)addLeftBorderWithColor:(UIColor *)color andWidth:(CGFloat) borderWidth {
    dispatch_async(dispatch_get_main_queue(), ^{
        CALayer *border = [CALayer layer];
        border.name = @"leftBorderLayer";
        [self removePreviouslyAddedLayer:border.name];
        border.backgroundColor = color.CGColor;
        border.frame = CGRectMake(0, 0, borderWidth, self.frame.size.height);
        [self.layer addSublayer:border];
        [self addObserver:self forKeyPath: @"bounds" options:NSKeyValueObservingOptionNew context:leftBorderContext];
    });
}

- (void)addRightBorderWithColor:(UIColor *)color andWidth:(CGFloat) borderWidth {
    dispatch_async(dispatch_get_main_queue(), ^{
        CALayer *border = [CALayer layer];
        border.name = @"rightBorderLayer";
        [self removePreviouslyAddedLayer:border.name];
        border.backgroundColor = color.CGColor;
        border.frame = CGRectMake(self.frame.size.width - borderWidth, 0, borderWidth, self.frame.size.height);
        [self.layer addSublayer:border];
        [self addObserver:self forKeyPath: @"bounds" options:NSKeyValueObservingOptionNew context:rightBorderContext];
    });
}
- (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context
{
    if (context == topBorderContext) {
        for (CALayer *border in self.layer.sublayers) {
            if ([border.name isEqualToString:@"topBorderLayer"]) {
                [border setFrame:CGRectMake(0, 0, self.frame.size.width, border.frame.size.height)];
            }
        }
    } else if (context == bottomBorderContext) {
        for (CALayer *border in self.layer.sublayers) {
            if ([border.name isEqualToString:@"bottomBorderLayer"]) {
                [border setFrame:CGRectMake(0, self.frame.size.height - border.frame.size.height, self.frame.size.width, border.frame.size.height)];
            }
        }
    } else if (context == leftBorderContext) {
        for (CALayer *border in self.layer.sublayers) {
            if ([border.name isEqualToString:@"leftBorderLayer"]) {
                [border setFrame:CGRectMake(0, 0, border.frame.size.width, self.frame.size.height)];
            }
        }
    } else if (context == rightBorderContext) {
        for (CALayer *border in self.layer.sublayers) {
            if ([border.name isEqualToString:@"rightBorderLayer"]) {
                [border setFrame:CGRectMake(self.frame.size.width - border.frame.size.width, 0, border.frame.size.width, self.frame.size.height)];
            }
        }
    } else {
        [super observeValueForKeyPath:keyPath ofObject:object change:change context:context];
    }
}
- (void)removePreviouslyAddedLayer:(NSString *)name {
    if (self.layer.sublayers.count > 0) {
        for (CALayer *layer in self.layer.sublayers) {
            if ([layer.name isEqualToString:name]) {
                [layer removeFromSuperlayer];
            }
        }
    }
}

@end

使用法:- ストーリーボードから任意のコントロールを選択し、属性インスペクターを表示します(右側)以下の画像の例が表示されます(注:境界線は実行時にのみ表示されます)。

これで、境界線の色と幅の任意の側を設定できます。


それは働いています..ありがとう..しかし、UINavigationBarに埋め込まれている場合、座標の計算が間違っています..
delavega66

2

私はあなたがどちらにでも望むどちらの側にも境界線を追加する一般的な方法を書きましたUIView。厚さ、色、マージン、およびzOrder各側面を定義できます。

/*
 view: the view to draw border around
 thickness: thickness of the border on the given side
 color: color of the border on the given side
 margin: space between the border's outer edge and the view's frame edge on the given side.
 zOrder: defines the order to add the borders to the view.  The borders will be added by zOrder from lowest to highest, thus making the highest priority border visible when two borders overlap at the corners.
*/

    +(void) drawBorderAroundUIView:(UIView *) view thicknessLeft:(CGFloat) thicknessLeft colorLeft:(UIColor *)colorLeft marginLeft:(CGFloat) marginLeft zOrderLeft:(int) zOrderLeft thicknessRight:(CGFloat) thicknessRight colorRight:(UIColor *)colorRight marginRight:(CGFloat) marginRight zOrderRight:(int) zOrderRight thicknessTop:(CGFloat) thicknessTop colorTop:(UIColor *)colorTop marginTop:(CGFloat) marginTop zOrderTop:(int) zOrderTop thicknessBottom:(CGFloat) thicknessBottom colorBottom:(UIColor *)colorBottom marginBottom:(CGFloat) marginBottom zOrderBottom:(int) zOrderBottom{
    //make margins be the outside edge and make positive margin represent a smaller rectangle
    marginBottom = -1 * marginBottom - thicknessBottom;
    marginTop = -1 * marginTop - thicknessTop;
    marginLeft = -1 * marginLeft - thicknessLeft;
    marginRight = -1 * marginRight - thicknessRight;

    //get reference points for corners
    CGPoint upperLeftCorner = CGPointZero;
    CGPoint lowerLeftCorner = CGPointMake(upperLeftCorner.x, upperLeftCorner.y + view.frame.size.height);
    CGPoint upperRightCorner = CGPointMake(upperLeftCorner.x + view.frame.size.width, upperLeftCorner.y);

    //left
    CALayer *leftBorder = [CALayer layer];
    leftBorder.frame = CGRectMake(upperLeftCorner.x - thicknessLeft - marginLeft, upperLeftCorner.y - thicknessTop - marginTop, thicknessLeft, view.frame.size.height + marginTop + marginBottom + thicknessBottom + thicknessTop);
    leftBorder.backgroundColor = colorLeft.CGColor;

    //right
    CALayer *rightBorder = [CALayer layer];
    rightBorder.frame = CGRectMake(upperRightCorner.x + marginRight, upperRightCorner.y - thicknessTop - marginTop, thicknessRight, view.frame.size.height + marginTop + marginBottom + thicknessBottom + thicknessTop);
    rightBorder.backgroundColor = colorRight.CGColor;

    //top
    CALayer *topBorder = [CALayer layer];
    topBorder.frame = CGRectMake(upperLeftCorner.x - thicknessLeft - marginLeft, upperLeftCorner.y - thicknessTop - marginTop, view.frame.size.width + marginLeft + marginRight + thicknessLeft + thicknessRight, thicknessTop);
    topBorder.backgroundColor = colorTop.CGColor;

    //bottom
    CALayer *bottomBorder = [CALayer layer];
    bottomBorder.frame = CGRectMake(upperLeftCorner.x - thicknessLeft - marginLeft, lowerLeftCorner.y + marginBottom, view.frame.size.width + marginLeft + marginRight + thicknessLeft + thicknessRight, thicknessBottom);
    bottomBorder.backgroundColor = colorBottom.CGColor;

    //define dictionary keys to be used for adding borders in order of zOrder
    NSString *borderDK = @"border";
    NSString *zOrderDK = @"zOrder";

    //storing borders in dictionaries in preparation to add them in order of zOrder
    NSDictionary *leftBorderDictionary = [NSDictionary dictionaryWithObjectsAndKeys:leftBorder, borderDK, [NSNumber numberWithInt:zOrderLeft], zOrderDK, nil];
    NSDictionary *rightBorderDictionary = [NSDictionary dictionaryWithObjectsAndKeys:rightBorder, borderDK, [NSNumber numberWithInt:zOrderRight], zOrderDK, nil];
    NSDictionary *topBorderDictionary = [NSDictionary dictionaryWithObjectsAndKeys:topBorder, borderDK, [NSNumber numberWithInt:zOrderTop], zOrderDK, nil];
    NSDictionary *bottomBorderDictionary = [NSDictionary dictionaryWithObjectsAndKeys:bottomBorder, borderDK, [NSNumber numberWithInt:zOrderBottom], zOrderDK, nil];

    NSMutableArray *borders = [NSMutableArray arrayWithObjects:leftBorderDictionary, rightBorderDictionary, topBorderDictionary, bottomBorderDictionary, nil];

    //add borders in order of zOrder (lowest -> highest).  Thus the highest zOrder will be added last so it will be on top.
    while (borders.count)
    {
        //look for the next lowest zOrder border to add
        NSDictionary *nextBorderToLayDown = [borders objectAtIndex:0];
        for (int indexOfBorder = 0; indexOfBorder < borders.count; indexOfBorder++)
        {
            NSDictionary *borderAtIndex = [borders objectAtIndex:indexOfBorder];
            if ([[borderAtIndex objectForKey:zOrderDK] intValue] < [[nextBorderToLayDown objectForKey:zOrderDK] intValue])
            {
                nextBorderToLayDown = borderAtIndex;
            }
        }
        //add the border to the view
        [view.layer addSublayer:[nextBorderToLayDown objectForKey:borderDK]];
        [borders removeObject:nextBorderToLayDown];
    }
}

2

境界線ごとにレイヤーを追加する必要はありません。ベジエパスを使用して1回描画するだけです。

CGRect rect = self.bounds;

CGPoint destPoint[4] = {CGPointZero,
    (CGPoint){0, rect.size.height},
    (CGPoint){rect.size.width, rect.size.height},
    (CGPoint){rect.size.width, 0}};

BOOL position[4] = {_top, _left, _bottom, _right};

UIBezierPath *path = [UIBezierPath new];
[path moveToPoint:destPoint[3]];

for (int i = 0; i < 4; ++i) {
    if (position[i]) {
        [path addLineToPoint:destPoint[i]];
    } else {
        [path moveToPoint:destPoint[i]];
    }
}

CAShapeLayer *borderLayer = [CAShapeLayer new];
borderLayer.frame = self.bounds;
borderLayer.path  = path.CGPath;
borderLayer.lineWidth   = _borderWidth ?: 1 / [UIScreen mainScreen].scale;
borderLayer.strokeColor = _borderColor.CGColor;
borderLayer.fillColor   = [UIColor clearColor].CGColor;

[self.layer addSublayer:borderLayer];

2

スウィフト4/3

このソリューションは下で使用できます。レイヤーよりも軽いUIBezierPathsで動作するため、起動時間が短くなります。使い方は簡単です。下の説明を参照してください。

class ResizeBorderView: UIView {
    var color = UIColor.white
    var lineWidth: CGFloat = 1
    var edges = [UIRectEdge](){
        didSet {
            setNeedsDisplay()
        }
    }
    override func draw(_ rect: CGRect) {
        if edges.contains(.top) || edges.contains(.all){
            let path = UIBezierPath()
            path.lineWidth = lineWidth
            color.setStroke()
            UIColor.blue.setFill()
            path.move(to: CGPoint(x: 0, y: 0 + lineWidth / 2))
            path.addLine(to: CGPoint(x: self.bounds.width, y: 0 + lineWidth / 2))
            path.stroke()
        }
        if edges.contains(.bottom) || edges.contains(.all){
            let path = UIBezierPath()
            path.lineWidth = lineWidth
            color.setStroke()
            UIColor.blue.setFill()
            path.move(to: CGPoint(x: 0, y: self.bounds.height - lineWidth / 2))
            path.addLine(to: CGPoint(x: self.bounds.width, y: self.bounds.height - lineWidth / 2))
            path.stroke()
        }
        if edges.contains(.left) || edges.contains(.all){
            let path = UIBezierPath()
            path.lineWidth = lineWidth
            color.setStroke()
            UIColor.blue.setFill()
            path.move(to: CGPoint(x: 0 + lineWidth / 2, y: 0))
            path.addLine(to: CGPoint(x: 0 + lineWidth / 2, y: self.bounds.height))
            path.stroke()
        }
        if edges.contains(.right) || edges.contains(.all){
            let path = UIBezierPath()
            path.lineWidth = lineWidth
            color.setStroke()
            UIColor.blue.setFill()
            path.move(to: CGPoint(x: self.bounds.width - lineWidth / 2, y: 0))
            path.addLine(to: CGPoint(x: self.bounds.width - lineWidth / 2, y: self.bounds.height))
            path.stroke()
        }
    }
}
  1. UIViewのクラスをResizeBorderViewに設定します。
  2. viewDidAppearメソッドでyourview.colorとyourview.lineWidthを使用して、色と線の幅を設定します。
  3. エッジを設定します。例:yourview.edges = [.right、.left]([.all])for all
  4. クイックスタートと境界線のサイズ変更をお楽しみください

2

スウィフト4

ベース:https : //stackoverflow.com/a/32821607/9980800

UIView + Border

extension UIView {

  enum ViewBorder: String {
      case left, right, top, bottom
  }

  func add(Border border: ViewBorder, withColor color: UIColor = UIColor.lightGray, andWidth width: CGFloat = 1.0) {

    let borderView = UIView()
    borderView.backgroundColor = color
    borderView.translatesAutoresizingMaskIntoConstraints = false
    self.addSubview(borderView)
    NSLayoutConstraint.activate(getConstrainsFor(forView: borderView, WithBorderType: border, andWidth: width))
  }

  private func getConstrainsFor(forView borderView: UIView, WithBorderType border: ViewBorder, andWidth width: CGFloat) -> [NSLayoutConstraint] {

    let height = borderView.heightAnchor.constraint(equalToConstant: width)
    let widthAnchor = borderView.widthAnchor.constraint(equalToConstant: width)
    let leading = borderView.leadingAnchor.constraint(equalTo: self.leadingAnchor)
    let trailing = borderView.trailingAnchor.constraint(equalTo: self.trailingAnchor)
    let top = borderView.topAnchor.constraint(equalTo: self.topAnchor)
    let bottom = borderView.bottomAnchor.constraint(equalTo: self.bottomAnchor)

    switch border {

    case .bottom:
        return [bottom, leading, trailing, height]

    case .top:
        return [top, leading, trailing, height]

    case .left:
        return [top, bottom, leading, widthAnchor]

    case .right:
        return [top, bottom, trailing, widthAnchor]
    }
}

}

使用法:-

class ViewController: UIViewController {

@IBOutlet weak var sampleView: UIView!
override func viewDidLoad() {
    super.viewDidLoad()
    // Do any additional setup after loading the view, typically from a nib.
    sampleView.add(Border: .bottom)
}

override func didReceiveMemoryWarning() {
    super.didReceiveMemoryWarning()
    // Dispose of any resources that can be recreated.
}
}

2

スウィフト4

に基づく https://stackoverflow.com/a/32513578/5391914に

import UIKit
enum ViewBorder: String {
    case Left = "borderLeft"
    case Right = "borderRight"
    case Top = "borderTop"
    case Bottom = "borderBottom"
}

extension UIView {
    
    func addBorder(vBorders: [ViewBorder], color: UIColor, width: CGFloat) {
        vBorders.forEach { vBorder in
            let border = CALayer()
            border.backgroundColor = color.cgColor
            border.name = vBorder.rawValue
            switch vBorder {
            case .Left:
                border.frame = CGRect(x: 0, y: 0, width: width, height: self.frame.size.height)
            case .Right:
                border.frame = CGRect(x:self.frame.size.width - width, y: 0, width: width, height: self.frame.size.height)
            case .Top:
                border.frame = CGRect(x: 0, y: 0, width: self.frame.size.width, height: width)
            case .Bottom:
                border.frame = CGRect(x: 0, y: self.frame.size.height - width , width: self.frame.size.width, height: width)
            }
            self.layer.addSublayer(border)
        }
    }
}

1

最も完全な答え。https://github.com/oney/UIView-Border

let rectangle = UIView(frame: CGRect(x: 100, y: 100, width: 100, height: 60))
rectangle.backgroundColor = UIColor.grayColor()
view.addSubview(rectangle)
rectangle.borderTop = Border(size: 3, color: UIColor.orangeColor(), offset: UIEdgeInsets(top: 0, left: -10, bottom: 0, right: -5))
rectangle.borderBottom = Border(size: 6, color: UIColor.redColor(), offset: UIEdgeInsets(top: 0, left: 10, bottom: 10, right: 0))
rectangle.borderLeft = Border(size: 2, color: UIColor.blueColor(), offset: UIEdgeInsets(top: 10, left: -10, bottom: 0, right: 0))
rectangle.borderRight = Border(size: 2, color: UIColor.greenColor(), offset: UIEdgeInsets(top: 10, left: 10, bottom: 0, right: 0))

ここに画像の説明を入力してください


1

ボーダーの幅と色を備えたSwift 4拡張機能。よく働く!

@IBDesignable
final class SideBorders: UIView {
@IBInspectable var topColor: UIColor = UIColor.clear
@IBInspectable var topWidth: CGFloat = 0

@IBInspectable var rightColor: UIColor = UIColor.clear
@IBInspectable var rightWidth: CGFloat = 0

@IBInspectable var bottomColor: UIColor = UIColor.clear
@IBInspectable var bottomWidth: CGFloat = 0

@IBInspectable var leftColor: UIColor = UIColor.clear
@IBInspectable var leftWidth: CGFloat = 0

override func draw(_ rect: CGRect) {
    let topBorder = CALayer()
    topBorder.backgroundColor = topColor.cgColor
    topBorder.frame = CGRect(x: 0, y: 0, width: self.frame.size.width, height: topWidth)
    self.layer.addSublayer(topBorder)

    let rightBorder = CALayer()
    rightBorder.backgroundColor = rightColor.cgColor
    rightBorder.frame = CGRect(x: self.frame.size.width - rightWidth, y: 0, width: rightWidth, height: self.frame.size.height)
    self.layer.addSublayer(rightBorder)

    let bottomBorder = CALayer()
    bottomBorder.backgroundColor = bottomColor.cgColor
    bottomBorder.frame = CGRect(x: 0, y: self.frame.size.height - bottomWidth, width: self.frame.size.width, height: bottomWidth)
    self.layer.addSublayer(bottomBorder)

    let leftBorder = CALayer()
    leftBorder.backgroundColor = leftColor.cgColor
    leftBorder.frame = CGRect(x: 0, y: self.frame.size.height - leftWidth, width: self.frame.size.width, height: leftWidth)
    self.layer.addSublayer(leftBorder)
}

}


1

Swift 5.1。2つの拡張機能、メソッドリターンCALayerを使用して、フレームを更新するためにそれを再利用します。

enum Border: Int {
    case top = 0
    case bottom
    case right
    case left
}

extension UIView {
    func addBorder(for side: Border, withColor color: UIColor, borderWidth: CGFloat) -> CALayer {
       let borderLayer = CALayer()
       borderLayer.backgroundColor = color.cgColor

       let xOrigin: CGFloat = (side == .right ? frame.width - borderWidth : 0)
       let yOrigin: CGFloat = (side == .bottom ? frame.height - borderWidth : 0)

       let width: CGFloat = (side == .right || side == .left) ? borderWidth : frame.width
       let height: CGFloat = (side == .top || side == .bottom) ? borderWidth : frame.height

       borderLayer.frame = CGRect(x: xOrigin, y: yOrigin, width: width, height: height)
       layer.addSublayer(borderLayer)
       return borderLayer
    }
}

extension CALayer {
    func updateBorderLayer(for side: Border, withViewFrame viewFrame: CGRect) {
        let xOrigin: CGFloat = (side == .right ? viewFrame.width - frame.width : 0)
        let yOrigin: CGFloat = (side == .bottom ? viewFrame.height - frame.height : 0)

        let width: CGFloat = (side == .right || side == .left) ? frame.width : viewFrame.width
        let height: CGFloat = (side == .top || side == .bottom) ? frame.height : viewFrame.height

        frame = CGRect(x: xOrigin, y: yOrigin, width: width, height: height)
    }
}

addBorderでUpdateBorderLayerを使用する方法
Chandan Jee

addBorderメソッドから返されるCALayerを保存する必要があります。次に、更新する必要がある場合(たとえば、viewDidLayoutSubviewsで)、このメソッドを呼び出します。それ以外の場合は制約を使用する
Ivan Tkachenko

1

拡張UIView {

func addBottomLine(color:UIColor、height:CGFloat){

   let bottomView = UIView(frame: CGRect(x: 0, y: self.frame.height - 1, width: self.frame.width, height: height))
    bottomView.translatesAutoresizingMaskIntoConstraints = false
    bottomView.autoresizingMask = .flexibleWidth
    bottomView.backgroundColor = color
    self.addSubview(bottomView)

}

}


このコードは質問に答えることがありますが、それがどのように機能し、いつそれを使用するかを説明するいくつかのコンテキストを含めることをお勧めします。コードのみの回答は、長期的には役に立ちません。
ムスタファ

私はあなたから聞いてうれしいです、私はあなたの質問に答えます-> 1-最初にあなたが望むものと呼ばれるファイルを作成し、それからUIViewから拡張を作成します。その後、最初に取るメソッドを追加しますCGFloatは2番目はUIColorです1行目の高さを1に変更します。CGFloatparamsとbottomView.backgroundColor = {THE_COLOR_PARAMS}を設定します
アーメドサミール
弊社のサイトを使用することにより、あなたは弊社のクッキーポリシーおよびプライバシーポリシーを読み、理解したものとみなされます。
Licensed under cc by-sa 3.0 with attribution required.