2つのテーブル間の違いを返すSQLクエリ

SQL Serverという2つのテーブルを比較して、いくつかのデータを確認しようとしています。データがどちらか一方にある両方のテーブルからすべての行を返したいのですが。本質的に、すべての不一致を示したいと思います。その際、FirstName、LastName、Productの3つのデータを確認する必要があります。

私はSQLにかなり慣れていないので、私が見つけている解決策の多くは複雑なものを超えているようです。NULLについて心配する必要はありません。

私はこのようなことを試すことから始めました：

SELECT DISTINCT [First Name], [Last Name], [Product Name] FROM [Temp Test Data]
WHERE ([First Name] NOT IN (SELECT [First Name] 
FROM [Real Data]))

私はこれをさらに進めるのに苦労しています。

ありがとう！

編集：

@treaschfの回答に基づいて、私は次のクエリのバリエーションを使用しようとしています：

SELECT td.[First Name], td.[Last Name], td.[Product Name]
FROM [Temp Test Data] td FULL OUTER JOIN [Data] AS d 
ON td.[First Name] = d.[First Name] AND td.[Last Name] = d.[Last Name] 
WHERE (d.[First Name] = NULL) AND (d.[Last Name] = NULL)

しかし、dではなくtdに少なくとも1つの行があることを知っているとき、私は0結果を返し続けます。

編集：

わかりました。少なくとも私の数分のテストでは、十分に機能しているようです。

SELECT [First Name], [Last Name]
FROM [Temp Test Data] AS td
WHERE (NOT EXISTS
        (SELECT [First Name], [Last Name]
         FROM [Data] AS d
         WHERE ([First Name] = td.[First Name]) OR ([Last Name] = td.[Last Name])))

これは基本的に、実際のデータにはないテストデータの内容を教えてくれます。これは、私がやらなければならないことにはまったく問題ありません。

テーブルがAありB、両方にcolumがあるC場合は、次のレコードがテーブルには存在しますAが、には存在しませんB。

SELECT A.*
FROM A
    LEFT JOIN B ON (A.C = B.C)
WHERE B.C IS NULL

1つのクエリですべての違いを取得するには、次のように完全結合を使用する必要があります。

SELECT A.*, B.*
FROM A
    FULL JOIN B ON (A.C = B.C)
WHERE A.C IS NULL OR B.C IS NULL

この場合に知っておく必要があるのは、レコードがにあるがにAはない場合にB、から来る列BがNULLになることです。同様BにA、にある列とない列には、Aは、 null。

(   SELECT * FROM table1
    EXCEPT
    SELECT * FROM table2)  
UNION ALL
(   SELECT * FROM table2
    EXCEPT
    SELECT * FROM table1) 

これは一般的な答えではないかもしれませんが、より複雑な比較が必要な場合はサードパーティツールを使用することについて@Randy Minderに同意します。

この特定のケースは簡単で、このケースではそのようなツールは必要ありませんが、より多くの列、2つのサーバー上のデータベース、より複雑な比較基準などを導入すると、簡単に複雑になる可能性があります。

ApexSQL Data DiffやQuest Toadなど、これらのツールは多数あり、いつでもトライアルモードで使用して作業を完了することができます。

2つのテーブル間のすべての違いを取得するには、次のSQLリクエストを私のように使用できます。

SELECT 'TABLE1-ONLY' AS SRC, T1.*
FROM (
      SELECT * FROM Table1
      EXCEPT
      SELECT * FROM Table2
      ) AS T1
UNION ALL
SELECT 'TABLE2-ONLY' AS SRC, T2.*
FROM (
      SELECT * FROM Table2
      EXCEPT
      SELECT * FROM Table1
      ) AS T2
;

行が存在するテーブルを示す@erikkallen回答の簡単なバリエーション：

(   SELECT 'table1' as source, * FROM table1
    EXCEPT
    SELECT * FROM table2)  
UNION ALL
(   SELECT 'table2' as source, * FROM table2
    EXCEPT
    SELECT * FROM table1) 

エラーが発生した場合

UNION、INTERSECT、またはEXCEPT演算子を使用して結合されたすべてのクエリは、ターゲットリストに同じ数の式を含める必要があります。

次に、追加するのに役立つことがあります

(   SELECT 'table1' as source, * FROM table1
    EXCEPT
    SELECT 'table1' as source, * FROM table2)  
UNION ALL
(   SELECT 'table2' as source, * FROM table2
    EXCEPT
    SELECT 'table2' as source, * FROM table1) 

異なる列の値を取得する場合は、Entity-Attribute-Valueモデルを使用できます。

declare @Data1 xml, @Data2 xml

select @Data1 = 
(
    select * 
    from (select * from Test1 except select * from Test2) as a
    for xml raw('Data')
)

select @Data2 = 
(
    select * 
    from (select * from Test2 except select * from Test1) as a
    for xml raw('Data')
)

;with CTE1 as (
    select
        T.C.value('../@ID', 'bigint') as ID,
        T.C.value('local-name(.)', 'nvarchar(128)') as Name,
        T.C.value('.', 'nvarchar(max)') as Value
    from @Data1.nodes('Data/@*') as T(C)    
), CTE2 as (
    select
        T.C.value('../@ID', 'bigint') as ID,
        T.C.value('local-name(.)', 'nvarchar(128)') as Name,
        T.C.value('.', 'nvarchar(max)') as Value
    from @Data2.nodes('Data/@*') as T(C)     
)
select
    isnull(C1.ID, C2.ID) as ID, isnull(C1.Name, C2.Name) as Name, C1.Value as Value1, C2.Value as Value2
from CTE1 as C1
    full outer join CTE2 as C2 on C2.ID = C1.ID and C2.Name = C1.Name
where
not
(
    C1.Value is null and C2.Value is null or
    C1.Value is not null and C2.Value is not null and C1.Value = C2.Value
)

SQL FIDDLEの例

これを試して ：

SELECT 
    [First Name], [Last Name]
FROM 
    [Temp Test Data] AS td EXCEPTION JOIN [Data] AS d ON 
         (d.[First Name] = td.[First Name] OR d.[Last Name] = td.[Last Name])

読む方がずっと簡単です。

これは、Tiagoのソリューションと同様にトリックを実行し、「ソース」テーブルも返します。

select [First name], [Last name], max(_tabloc) as _tabloc
from (
  select [First Name], [Last name], 't1' as _tabloc from table1
  union all
  select [First name], [Last name], 't2' as _tabloc from table2
) v
group by [Fist Name], [Last name]
having count(1)=1

結果にはテーブル間の違いが含まれ、_tabloc列にはテーブル参照があります。

キャデラックオブディフをSPとして提示します。@erikkallenの回答に基づいた基本テンプレートについては、insideを参照してください。サポートしています

• 重複行の検出（ここでの他のほとんどの回答ではありません）
• 結果を引数で並べ替え
• 特定の列に制限する
• 列を無視（例：ModifiedUtc）
• クロスデータベーステーブル名
• 一時テーブル（ビューを比較するための回避策として使用）

使用法：

exec Common.usp_DiffTableRows '#t1', '#t2';

exec Common.usp_DiffTableRows 
    @pTable0          = 'ydb.ysh.table1',
    @pTable1          = 'xdb.xsh.table2',
    @pOrderByCsvOpt   = null,  -- Order the results
    @pOnlyCsvOpt      = null,  -- Only compare these columns
    @pIgnoreCsvOpt    = null;  -- Ignore these columns (ignored if @pOnlyCsvOpt is specified)

コード：

alter proc [Common].[usp_DiffTableRows]    
    @pTable0          varchar(300),
    @pTable1          varchar(300),
    @pOrderByCsvOpt   nvarchar(1000) = null,  -- Order the Results
    @pOnlyCsvOpt      nvarchar(4000) = null,  -- Only compare these columns
    @pIgnoreCsvOpt    nvarchar(4000) = null,  -- Ignore these columns (ignored if @pOnlyCsvOpt is specified)
    @pDebug           bit = 0
as
/*---------------------------------------------------------------------------------------------------------------------
    Purpose:  Compare rows between two tables.

      Usage:  exec Common.usp_DiffTableRows '#a', '#b';

    Modified    By          Description
    ----------  ----------  -------------------------------------------------------------------------------------------
    2015.10.06  crokusek    Initial Version
    2019.03.13  crokusek    Added @pOrderByCsvOpt
    2019.06.26  crokusek    Support for @pIgnoreCsvOpt, @pOnlyCsvOpt.    
    2019.09.04  crokusek    Minor debugging improvement
    2020.03.12  crokusek    Detect duplicate rows in either source table
  ---------------------------------------------------------------------------------------------------------------------*/
begin try

    if (substring(@pTable0, 1, 1) = '#')
        set @pTable0 = 'tempdb..' + @pTable0; -- object_id test below needs full names for temp tables

    if (substring(@pTable1, 1, 1) = '#')
        set @pTable1 = 'tempdb..' + @pTable1; -- object_id test below needs full names for temp tables

    if (object_id(@pTable0) is null)
        raiserror('Table name is not recognized: ''%s''', 16, 1, @pTable0);

    if (object_id(@pTable1) is null)
        raiserror('Table name is not recognized: ''%s''', 16, 1, @pTable1);

    create table #ColumnGathering
    (
        Name nvarchar(300) not null,
        Sequence int not null,
        TableArg tinyint not null
    );

    declare
        @usp          varchar(100) = object_name(@@procid),    
        @sql          nvarchar(4000),
        @sqlTemplate  nvarchar(4000) = 
        '  
            use $database$;

            insert into #ColumnGathering
            select Name, column_id as Sequence, $TableArg$ as TableArg
              from sys.columns c
             where object_id = object_id(''$table$'', ''U'')
        ';          

    set @sql = replace(replace(replace(@sqlTemplate,
        '$TableArg$', 0),
        '$database$', (select DatabaseName from Common.ufn_SplitDbIdentifier(@pTable0))),
        '$table$', @pTable0);

    if (@pDebug = 1)
        print 'Sql #CG 0: ' + @sql;

    exec sp_executesql @sql;

    set @sql = replace(replace(replace(@sqlTemplate,
        '$TableArg$', 1),
        '$database$', (select DatabaseName from Common.ufn_SplitDbIdentifier(@pTable1))),
        '$table$', @pTable1);

    if (@pDebug = 1)
        print 'Sql #CG 1: ' + @sql;

    exec sp_executesql @sql;

    if (@pDebug = 1)
        select * from #ColumnGathering;

    select Name, 
           min(Sequence) as Sequence, 
           convert(bit, iif(min(TableArg) = 0, 1, 0)) as InTable0,
           convert(bit, iif(max(TableArg) = 1, 1, 0)) as InTable1
      into #Columns
      from #ColumnGathering
     group by Name
    having (     @pOnlyCsvOpt is not null 
             and Name in (select Value from Common.ufn_UsvToNVarcharKeyTable(@pOnlyCsvOpt, default)))
        or 
           (     @pOnlyCsvOpt is null
             and @pIgnoreCsvOpt is not null 
             and Name not in (select Value from Common.ufn_UsvToNVarcharKeyTable(@pIgnoreCsvOpt, default)))
        or 
           (     @pOnlyCsvOpt is null
             and @pIgnoreCsvOpt is null)

    if (exists (select 1 from #Columns where InTable0 = 0 or InTable1 = 0))
    begin
        select 1; -- without this the debugging info doesn't stream sometimes
        select * from #Columns order by Sequence;        
        waitfor delay '00:00:02';  -- give results chance to stream before raising exception
        raiserror('Columns are not equal between tables, consider using args @pIgnoreCsvOpt, @pOnlyCsvOpt.  See Result Sets for details.', 16, 1);    
    end

    if (@pDebug = 1)
        select * from #Columns order by Sequence;

    declare 
        @columns nvarchar(4000) = --iif(@pOnlyCsvOpt is null and @pIgnoreCsvOpt is null,
           -- '*',     
            (
              select substring((select ',' + ac.name
                from #Columns ac
               order by Sequence
                 for xml path('')),2,200000) as csv
            );

    if (@pDebug = 1)
    begin
        print 'Columns: ' + @columns;
        waitfor delay '00:00:02';  -- give results chance to stream before possibly raising exception
    end

    -- Based on https://stackoverflow.com/a/2077929/538763
    --     - Added sensing for duplicate rows
    --     - Added reporting of source table location
    --
    set @sqlTemplate = '
            with 
               a as (select ~, Row_Number() over (partition by ~ order by (select null)) -1 as Duplicates from $a$), 
               b as (select ~, Row_Number() over (partition by ~ order by (select null)) -1 as Duplicates from $b$)
            select 0 as SourceTable, ~
              from 
                 (
                   select * from a
                   except
                   select * from b
                 )  anb
              union all
             select 1 as SourceTable, ~
               from 
                 (
                   select * from b
                   except
                   select * from a
                 )  bna
             order by $orderBy$
        ';    

     set @sql = replace(replace(replace(replace(@sqlTemplate, 
            '$a$', @pTable0), 
            '$b$', @pTable1),
            '~', @columns),
            '$orderBy$', coalesce(@pOrderByCsvOpt, @columns + ', SourceTable')
        );

     if (@pDebug = 1)
        print 'Sql: ' + @sql;

     exec sp_executesql @sql;

end try
begin catch
    declare        
        @CatchingUsp  varchar(100) = object_name(@@procid);    

    if (xact_state() = -1)
        rollback;    

    -- Disabled for S.O. post

    --exec Common.usp_Log
        --@pMethod = @CatchingUsp;

    --exec Common.usp_RethrowError        
        --@pCatchingMethod = @CatchingUsp;

    throw;
end catch
go

create function Common.Trim
(
    @pOriginalString nvarchar(max), 
    @pCharsToTrim nvarchar(50) = null -- specify null or 'default' for whitespae 
)  
returns table
with schemabinding
as 
/*--------------------------------------------------------------------------------------------------
    Purpose:   Trim the specified characters from a string.

    Modified    By              Description
    ----------  --------------  --------------------------------------------------------------------
    2012.09.25  S.Rutszy/crok   Modified from https://dba.stackexchange.com/a/133044/9415    
  --------------------------------------------------------------------------------------------------*/ 
return
with cte AS
(
  select patindex(N'%[^' + EffCharsToTrim + N']%', @pOriginalString) AS [FirstChar],
         patindex(N'%[^' + EffCharsToTrim + N']%', reverse(@pOriginalString)) AS [LastChar],
         len(@pOriginalString + N'~') - 1 AS [ActualLength]
   from
   (
         select EffCharsToTrim = coalesce(@pCharsToTrim, nchar(0x09) + nchar(0x20) + nchar(0x0d) + nchar(0x0a))
   ) c
)
select substring(@pOriginalString, [FirstChar],
                 ((cte.[ActualLength] - [LastChar]) - [FirstChar] + 2)
       ) AS [TrimmedString]
       --
       --cte.[ActualLength],
       --[FirstChar],
       --((cte.[ActualLength] - [LastChar]) + 1) AS [LastChar]              
from cte;
go

create function [Common].[ufn_UsvToNVarcharKeyTable] (
    @pCsvList     nvarchar(MAX),
    @pSeparator   nvarchar(1) = ','       -- can pass keyword 'default' when calling using ()'s
    )    
    --
    -- SQL Server 2012 distinguishes nvarchar keys up to maximum of 450 in length (900 bytes)
    -- 
    returns @tbl table (Value nvarchar(450) not null primary key(Value)) as
/*-------------------------------------------------------------------------------------------------
    Purpose:  Converts a comma separated list of strings into a sql NVarchar table.  From

              http://www.programmingado.net/a-398/SQL-Server-parsing-CSV-into-table.aspx     

              This may be called from RunSelectQuery:

                  GRANT SELECT ON Common.ufn_UsvToNVarcharTable TO MachCloudDynamicSql;

    Modified    By              Description
    ----------  --------------  -------------------------------------------------------------------
    2011.07.13  internet        Initial version
    2011.11.22  crokusek        Support nvarchar strings and a custom separator.
    2017.12.06  crokusek        Trim leading and trailing whitespace from each element.
    2019.01.26  crokusek        Remove newlines
  -------------------------------------------------------------------------------------------------*/     
begin
    declare 
        @pos      int,
        @textpos  int,
        @chunklen smallint,
        @str      nvarchar(4000),
        @tmpstr   nvarchar(4000),
        @leftover nvarchar(4000),
        @csvList nvarchar(max) = iif(@pSeparator not in (char(13), char(10), char(13) + char(10)),
            replace(replace(@pCsvList, char(13), ''), char(10), ''),
            @pCsvList); -- remove newlines

    set @textpos = 1
    set @leftover = ''  
    while @textpos <= len(@csvList)
    begin
        set @chunklen = 4000 - len(@leftover)
        set @tmpstr = ltrim(@leftover + substring(@csvList, @textpos, @chunklen))
        set @textpos = @textpos + @chunklen

        set @pos = charindex(@pSeparator, @tmpstr)
        while @pos > 0
        begin
            set @str = substring(@tmpstr, 1, @pos - 1)
            set @str = (select TrimmedString from Common.Trim(@str, default));
            insert @tbl (value) values(@str);
            set @tmpstr = ltrim(substring(@tmpstr, @pos + 1, len(@tmpstr)))
            set @pos = charindex(@pSeparator, @tmpstr)
        end

        set @leftover = @tmpstr
    end

    -- Handle @leftover

    set @str = (select TrimmedString from Common.Trim(@leftover, default));

    if @str <> ''
       insert @tbl (value) values(@str);

    return
end
GO

create function Common.ufn_SplitDbIdentifier(@pIdentifier nvarchar(300))
returns @table table 
(    
    InstanceName          nvarchar(300) not null,
    DatabaseName          nvarchar(300) not null,
    SchemaName            nvarchar(300),
    BaseName              nvarchar(300) not null,
    FullTempDbBaseName    nvarchar(300),            -- non-null for tempdb (e.g. #Abc____...)
    InstanceWasSpecified  bit not null,
    DatabaseWasSpecified  bit not null,
    SchemaWasSpecified    bit not null,
    IsCurrentInstance     bit not null,
    IsCurrentDatabase     bit not null,
    IsTempDb              bit not null,
    OrgIdentifier         nvarchar(300) not null
) as
/*-----------------------------------------------------------------------------------------------------------
    Purpose:  Split a Sql Server Identifier into its parts, providing appropriate default values and
              handling temp table (tempdb) references.

    Example:  select * from Common.ufn_SplitDbIdentifier('t')
              union all
              select * from Common.ufn_SplitDbIdentifier('s.t')
              union all
              select * from Common.ufn_SplitDbIdentifier('d.s.t')
              union all
              select * from Common.ufn_SplitDbIdentifier('i.d.s.t')
              union all
              select * from Common.ufn_SplitDbIdentifier('#d')
              union all
              select * from Common.ufn_SplitDbIdentifier('tempdb..#d'); 

              -- Empty
              select * from Common.ufn_SplitDbIdentifier('illegal name'); 

    Modified    By              Description
    ----------  --------------  -----------------------------------------------------------------------------
    2013.09.27  crokusek        Initial version.  
  -----------------------------------------------------------------------------------------------------------*/
begin
    declare 
        @name nvarchar(300) = ltrim(rtrim(@pIdentifier));

    -- Return an empty table as a "throw"
    --
    --Removed for SO post
    --if (Common.ufn_IsSpacelessLiteralIdentifier(@name) = 0)
      --  return;

    -- Find dots starting from the right by reversing first.

    declare 
        @revName nvarchar(300) = reverse(@name);

    declare
        @firstDot int = charindex('.', @revName);

    declare
        @secondDot  int = iif(@firstDot = 0,  0, charindex('.', @revName, @firstDot + 1));

    declare
        @thirdDot   int = iif(@secondDot = 0, 0, charindex('.', @revName, @secondDot + 1));

    declare
        @fourthDot  int = iif(@thirdDot = 0, 0, charindex('.', @revName, @thirdDot + 1));

    --select @firstDot, @secondDot, @thirdDot, @fourthDot, len(@name);

    -- Undo the reverse() (first dot is first from the right).
    --
    set @firstDot = iif(@firstDot = 0, 0, len(@name) - @firstDot + 1);
    set @secondDot = iif(@secondDot = 0, 0, len(@name) - @secondDot + 1);
    set @thirdDot = iif(@thirdDot = 0, 0, len(@name) - @thirdDot + 1);
    set @fourthDot = iif(@fourthDot = 0, 0, len(@name) - @fourthDot + 1);

    --select @firstDot, @secondDot, @thirdDot, @fourthDot, len(@name);

    declare
        @baseName   nvarchar(300)  = substring(@name, @firstDot + 1, len(@name) - @firstdot);

    declare
        @schemaName nvarchar(300) = iif(@firstDot - @secondDot - 1 <= 0, 
                                        null,
                                        substring(@name, @secondDot + 1, @firstDot - @secondDot - 1));
    declare
        @dbName     nvarchar(300) = iif(@secondDot - @thirdDot - 1 <= 0, 
                                        null,
                                        substring(@name, @thirdDot + 1, @secondDot - @thirdDot - 1));
    declare
        @instName   nvarchar(300) = iif(@thirdDot - @fourthDot - 1 <= 0, 
                                        null, 
                                        substring(@name, @fourthDot + 1, @thirdDot - @fourthDot - 1));

    with input as (
        select
           coalesce(@instName, '[' + @@servername + ']') as InstanceName,
           coalesce(@dbName,     iif(left(@baseName, 1) = '#', 'tempdb', db_name())) as DatabaseName,
           coalesce(@schemaName, iif(left(@baseName, 1) = '#', 'dbo', schema_name())) as SchemaName,
           @baseName as BaseName,
           iif(left(@baseName, 1) = '#',
               (
                  select [name] from tempdb.sys.objects
                  where object_id = object_id('tempdb..' + @baseName)
               ), 
               null) as FullTempDbBaseName,                
           iif(@instName is null, 0, 1) InstanceWasSpecified,       
           iif(@dbName is null, 0, 1) DatabaseWasSpecified,
           iif(@schemaName is null, 0, 1) SchemaWasSpecified    
     )
     insert into @table           
     select i.InstanceName, i.DatabaseName, i.SchemaName, i.BaseName, i.FullTempDbBaseName,
            i.InstanceWasSpecified, i.DatabaseWasSpecified, i.SchemaWasSpecified,
            iif(i.InstanceName = '[' + @@servername + ']', 1, 0) as IsCurrentInstance,
            iif(i.DatabaseName = db_name(), 1, 0) as IsCurrentDatabase,
            iif(left(@baseName, 1) = '#', 1, 0) as IsTempDb,
            @name as OrgIdentifier
       from input i;

    return;
end
GO

次のように、exceptを使用できます。

-- DB1..Tb1 have values than DB2..Tb1 not have
Select Col1,Col2,Col3 From DB1..Tb1
except
Select Col1,Col2,Col3 From DB2..Tb1
-- Now we change order
-- DB2..Tb1 have values than DB1..Tb1 not have
Select Col1,Col2,Col3 From DB2..Tb1
except
Select Col1,Col2,Col3 From DB1..Tb1

列名を気にせずに2つのテーブルが一致することを確認しようとしている単純な煙のテストの場合：

--ensure tables have matching records
Select count (*) from tbl_A
Select count (*) from tbl_B

--create temp table of all records in both tables
Select * into #demo from tbl_A 
Union All
Select * from tbl_B

--Distinct #demo records = Total #demo records/2 = Total tbl_A records = total tbl_B records
Select distinct * from #demo 

テーブルのバッチを比較するストアプロシージャを簡単に記述できます。

左側の結合と大きなデータの完全結合に関連するパフォーマンスの問題があります。

私の意見では、これが最良の解決策です：

select [First Name], count(1) e from (select * from [Temp Test Data] union all select * from [Temp Test Data 2]) a group by [First Name] having e = 1