Samsung Galaxy S2をUSB経由で接続した後の多くの「入出力エラー」

9

Samsung Galaxy S2（GT-9100、Android 2.3.4、I9100XXKI1）をLinuxボックス（Ubuntu 11.10 oneiric）に接続しようとしています。

USBストレージモードを使用しています（設定➔ワイヤレスとネットワーク➔USBユーティリティ）。

デバイスが認識され、2つのデバイスノード/devが作成されます。

syslogに、次の出力が表示されます。

sd 9:0:0:1: [sdh] 62325760 512-byte logical blocks: (31.9 GB/29.7 GiB)
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 c8 00 00 08 00
end_request: I/O error, dev sdh, sector 1224
quiet_error: 98 callbacks suppressed
Buffer I/O error on device sdh, logical block 153
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
Buffer I/O error on device sdh, logical block 146
Buffer I/O error on device sdh, logical block 147
Buffer I/O error on device sdh, logical block 148
Buffer I/O error on device sdh, logical block 149
Buffer I/O error on device sdh, logical block 150
Buffer I/O error on device sdh, logical block 151
Buffer I/O error on device sdh, logical block 152
Buffer I/O error on device sdh, logical block 153
Buffer I/O error on device sdh, logical block 154
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:0: [sdg] 24133632 512-byte logical blocks: (12.3 GB/11.5 GiB)
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:0: [sdg] Media Changed
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Unit Attention [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 10 00
end_request: I/O error, dev sdg, sector 32
 sdg:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:0: [sdg] Media Changed
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Unit Attention [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 48 00
end_request: I/O error, dev sdg, sector 32
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
quiet_error: 56 callbacks suppressed
Buffer I/O error on device sdh, logical block 146
Buffer I/O error on device sdh, logical block 147
Buffer I/O error on device sdh, logical block 148
Buffer I/O error on device sdh, logical block 149
Buffer I/O error on device sdh, logical block 150
Buffer I/O error on device sdh, logical block 151
Buffer I/O error on device sdh, logical block 152
Buffer I/O error on device sdh, logical block 153
Buffer I/O error on device sdh, logical block 154
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 01 a8 00 00 08 00
end_request: I/O error, dev sdg, sector 424
Buffer I/O error on device sdg, logical block 53
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 02 00 00 00 08 00
end_request: I/O error, dev sdg, sector 512
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 08 00
end_request: I/O error, dev sdg, sector 32
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 10 00 00 00 08 00
end_request: I/O error, dev sdg, sector 4096
sdg: detected capacity change from 12356419584 to 0
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 08 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 00 18 00 00 08 00
end_request: I/O error, dev sdh, sector 24
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 00 18 00 00 08 00
end_request: I/O error, dev sdh, sector 24

ルートフォルダーを一覧表示しようとすると、次のようになります。

ls: cannot access /media/3CB1-07D3/Samsung: Input/output error
ls: cannot access /media/3CB1-07D3/LOST.DIR: Input/output error
ls: cannot access /media/3CB1-07D3/external_sd: Input/output error
ls: cannot access /media/3CB1-07D3/usbStorage: Input/output error
...

PhoneUtilを使用してUSB接続モードをリセットしようとしましたが、それでも解決しませんでした。電話を手動でマウントしようとすると、同じ結果が得られました。

次に、USBデバッグを有効にしてみました。この場合、syslogは次のように述べています。

usb 1-1.5: new high speed USB device number 11 using ehci_hcd
scsi10 : usb-storage 1-1.5:1.0
Jan 11 10:24:23 host mtp-probe: checking bus 1, device 11: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5"
Jan 11 10:24:23 host mtp-probe: bus: 1, device: 11 was not an MTP device
cdc_acm 1-1.5:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 11 10:24:24 host modem-manager[1288]: <info>  (ttyACM0) opening serial port...
scsi 10:0:0:0: Direct-Access     Android    UMS Composite    00 PQ: 0 ANSI: 2
scsi 10:0:0:1: Direct-Access     Android    UMS Composite    00 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg7 type 0
sd 10:0:0:1: Attached scsi generic sg8 type 0
sd 10:0:0:0: [sdg] Attached SCSI removable disk
sd 10:0:0:1: [sdh] Attached SCSI removable disk

マウントしようとする/dev/sdgと、mount: no medium found on /dev/sdh

これはかつてUSBストレージモードを使用して機能していたことをぼんやり覚えています。それまでの間、ファームウェアアップデートをインストールしました。次に何を試してみればいいですか？

関連のない質問：

samsung-galaxy-s-2  usb  linux 
— アーロン・ディグラ
ソース

回答:

1

あなたのUbuntuはとても時代遅れです。12.03 12.10。13.04。13.10 14.04はすべてUbuntuの新しいバージョンです。可能な場合は14.04以降を使用してください

私のS2 sdcardの13の問題はほとんど存在しないので

— user42276
ソース
1
私はもう電話を持っていませんが、13.xx以降、USB接続はほとんどの時間機能していたことを覚えています。もちろん、今私はS4と新しい問題（MTPサポート;-)を抱えています
— アーロン・ディグラ2014年
@AaronDigulla設定ストレージでums（ユニバーサルマスストレージと思います）を有効にします。これを有効にして完全に機能します（ただし、AndroidでUSBストレージを接続するオプションが表示される理由はわかりません）が、USBデバッグがオンのとき（テザーを逆にすると） MTPエラーが発生し、Windowsの下に埋め込まれているのを見つけて、PCの電話ストレージにアクセスするために閉じる必要があります
— user42276
@AaronDigulla HAHHAAHA LOLこれは2歳だよ！
— user42276 14年
UMSのデバイスをroot化する必要があります。私はまだ
— そんなに
@AaronDigulla応援する価値あり
— user42276 14年
0

SDカードの欠陥によって引き起こされた同様の症状はほとんど覚えていませんが、両方の仮想デバイスの問題については説明していません。コンピューター側で別のケーブルと別のUSBポートを試しましたか？問題の原因がケーブルの接続不良ではないことを確認するだけです...

— mo '
ソース
2
Uups、最初に質問の日付を確認しておくべきだった... :-D
— mo '
0

S2 USBオプションでUSB転送モードを有効にしてください。そのように私にとってはうまくいきます。その他の設定> USBユーティリティ>大容量ストレージ。

— user53872
ソース
NOT IF USBデバッグが原因で、開いている電話ディレクトリのクリックをブロックするMTPエラーメッセージがある
— user42276
弊社のサイトを使用することにより、あなたは弊社のクッキーポリシーおよびプライバシーポリシーを読み、理解したものとみなされます。
Licensed under cc by-sa 3.0 with attribution required.